基于光纤光栅的同时测量交流电流和温度的传感器

D. Reilly, A. J. Willshire, G. Fusiek, P. Niewczas, J. R. McDonald
{"title":"基于光纤光栅的同时测量交流电流和温度的传感器","authors":"D. Reilly, A. J. Willshire, G. Fusiek, P. Niewczas, J. R. McDonald","doi":"10.1109/ICSENS.2004.1426453","DOIUrl":null,"url":null,"abstract":"In this paper, we describe a sensor capable of measuring both AC current and temperature using a single fibre Bragg grating (FBG). The device consists of a magnetically biased magnetostrictive alloy bonded to an FBG. The magnetic field generated by the current in a specially designed coil produces internal strains in the magnetostrictive alloy which can be detected by the FBG. The temperature at the sensing point is determined through averaging of the sensor output signal. The measurement range of the sensor can be varied by altering the design of the sensor coil. A prototype sensor has been constructed capable of measuring AC currents up to 1 A while simultaneously measuring temperatures up to 100/spl deg/C.","PeriodicalId":20476,"journal":{"name":"Proceedings of IEEE Sensors, 2004.","volume":"32 1","pages":"1426-1429 vol.3"},"PeriodicalIF":0.0000,"publicationDate":"2004-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"18","resultStr":"{\"title\":\"A fibre Bragg grating based sensor for simultaneous AC current and temperature measurement\",\"authors\":\"D. Reilly, A. J. Willshire, G. Fusiek, P. Niewczas, J. R. McDonald\",\"doi\":\"10.1109/ICSENS.2004.1426453\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this paper, we describe a sensor capable of measuring both AC current and temperature using a single fibre Bragg grating (FBG). The device consists of a magnetically biased magnetostrictive alloy bonded to an FBG. The magnetic field generated by the current in a specially designed coil produces internal strains in the magnetostrictive alloy which can be detected by the FBG. The temperature at the sensing point is determined through averaging of the sensor output signal. The measurement range of the sensor can be varied by altering the design of the sensor coil. A prototype sensor has been constructed capable of measuring AC currents up to 1 A while simultaneously measuring temperatures up to 100/spl deg/C.\",\"PeriodicalId\":20476,\"journal\":{\"name\":\"Proceedings of IEEE Sensors, 2004.\",\"volume\":\"32 1\",\"pages\":\"1426-1429 vol.3\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2004-10-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"18\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Proceedings of IEEE Sensors, 2004.\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ICSENS.2004.1426453\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Proceedings of IEEE Sensors, 2004.","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICSENS.2004.1426453","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 18

摘要

在本文中,我们描述了一种能够使用单个光纤布拉格光栅(FBG)测量交流电流和温度的传感器。该装置由磁偏磁致伸缩合金与FBG结合而成。由电流在特殊设计的线圈中产生的磁场在磁致伸缩合金中产生内部应变,可以通过FBG检测。通过对传感器输出信号取平均值来确定感测点的温度。传感器的测量范围可以通过改变传感器线圈的设计来改变。已经构建了一个原型传感器,能够测量高达1a的交流电流,同时测量高达100/spl度/C的温度。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
A fibre Bragg grating based sensor for simultaneous AC current and temperature measurement
In this paper, we describe a sensor capable of measuring both AC current and temperature using a single fibre Bragg grating (FBG). The device consists of a magnetically biased magnetostrictive alloy bonded to an FBG. The magnetic field generated by the current in a specially designed coil produces internal strains in the magnetostrictive alloy which can be detected by the FBG. The temperature at the sensing point is determined through averaging of the sensor output signal. The measurement range of the sensor can be varied by altering the design of the sensor coil. A prototype sensor has been constructed capable of measuring AC currents up to 1 A while simultaneously measuring temperatures up to 100/spl deg/C.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信