Radiation Curing of Coatings

Abstract Printing inks, paints, and other coatings are applied as a liquid or paste but must change to a solid and nontacky state before the painted or coated article can be used. The change is known as curing or drying. Sometimes it occurs by physical means, the evaporation of a solvent or dispersion medium for example, and sometimes by chemical changes such as polymerization and cross-linking. These chemical processes connect the many relatively small molecules of the original liquid or paste into a large molecular network or insoluble solid, which may be either rigid or rubbery in consistency depending upon the requirements of a particular application. Among traditional materials, gravure inks and many lacquers dry by solvent evaporation while paints and inks based upon linseed oil “dry” by chemical cross-linking promoted by oxygen in the air. Considerable time is usually required for curing in both methods, and the evaporation of solvents can result in air pollution and potential fire hazards. There i...