The Effect of Ultraviolet Light Stabilizers on Color Stability, Melt Properties and Tensile Properties of Mixed Waste Plastics Blends

Plastic waste disposal is among the most challenging problems of the current era. Therefore, new methods and applications for the utilization of waste plastics are increasingly needed. To find them, it is essential to research and develop the material properties of recycled plastics. The effect of different ultraviolet light (UV) stabilizers on the color stability, melt properties and tensile properties of mixed waste plastics blends was studied in this paper. The mixed waste plastics collected from two different waste sources were prepared as specimens by injection molding, and studied with two different types and loading amounts of UV stabilizers. UV absorbers (UVAs) and hindered amine light stabilizers (HALS) were used as UV stabilizers. A specimen produced without the addition of a UV stabilizer was used as a reference specimen of both the blends. After the accelerated weathering, the addition of a UVA provided an improved, smaller change in color than the addition of HALS. Among the tensile properties, the addition of UV stabilizers clearly improved the tensile strength and tensile modulus for almost all the studied specimens. Additionally, the melt properties of both the studied plastic blends were found to be increased by the addition of UV stabilizers.