Shahab Ud-Din Khan, Muhammad Abdullah, Ahmad Ali, R. Khan, Sehrish Shakir, Z. Rehman, Shahzaib Zahid, R. Ali
{"title":"MT-II型球形托卡马克限制器设计及材料组成的确定","authors":"Shahab Ud-Din Khan, Muhammad Abdullah, Ahmad Ali, R. Khan, Sehrish Shakir, Z. Rehman, Shahzaib Zahid, R. Ali","doi":"10.1515/kern-2022-0073","DOIUrl":null,"url":null,"abstract":"Abstract MT-II is a spherical tokamak with a major radius of 0.15 m and a minor radius of 0.09 m, currently under development at the Pakistan Tokamak Plasma Research Institute. It is designed with a higher elongation of 2.67. This paper presents the design and material analysis of the limiter configuration for the MT-II tokamak, which is being carried out in two phases. In the first phase, theoretical studies and calculations are performed to estimate the plasma edge temperature, density, particle velocity, input power, heat flux, heat load and surface temperature on the limiter tile. In the second phase, computational techniques are applied to analyses the material properties, the maximum/minimum surface temperature rise (∆T °C) at stable heat load and power deposition based on theoretical calculations that will help optimize the design parameters of the limiter. The type of material and the surface temperature of the limiter as well as the general design parameters of MT-II are included in the proposed poloidal limiter. The results suggest that crystalline vein graphite is a suitable candidate for the proposed poloidal limiter. A combination of mechanical and electrical feedthrough techniques are used to improve the performance of the limiter. The proposed limiter is able to meet the requirements of MT-II.","PeriodicalId":17787,"journal":{"name":"Kerntechnik","volume":"48 1","pages":"54 - 62"},"PeriodicalIF":0.4000,"publicationDate":"2022-12-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"Determination of limiter design and material composition of MT-II spherical tokamak\",\"authors\":\"Shahab Ud-Din Khan, Muhammad Abdullah, Ahmad Ali, R. Khan, Sehrish Shakir, Z. Rehman, Shahzaib Zahid, R. Ali\",\"doi\":\"10.1515/kern-2022-0073\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Abstract MT-II is a spherical tokamak with a major radius of 0.15 m and a minor radius of 0.09 m, currently under development at the Pakistan Tokamak Plasma Research Institute. It is designed with a higher elongation of 2.67. This paper presents the design and material analysis of the limiter configuration for the MT-II tokamak, which is being carried out in two phases. In the first phase, theoretical studies and calculations are performed to estimate the plasma edge temperature, density, particle velocity, input power, heat flux, heat load and surface temperature on the limiter tile. In the second phase, computational techniques are applied to analyses the material properties, the maximum/minimum surface temperature rise (∆T °C) at stable heat load and power deposition based on theoretical calculations that will help optimize the design parameters of the limiter. The type of material and the surface temperature of the limiter as well as the general design parameters of MT-II are included in the proposed poloidal limiter. The results suggest that crystalline vein graphite is a suitable candidate for the proposed poloidal limiter. A combination of mechanical and electrical feedthrough techniques are used to improve the performance of the limiter. The proposed limiter is able to meet the requirements of MT-II.\",\"PeriodicalId\":17787,\"journal\":{\"name\":\"Kerntechnik\",\"volume\":\"48 1\",\"pages\":\"54 - 62\"},\"PeriodicalIF\":0.4000,\"publicationDate\":\"2022-12-22\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Kerntechnik\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1515/kern-2022-0073\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"NUCLEAR SCIENCE & TECHNOLOGY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Kerntechnik","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1515/kern-2022-0073","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"NUCLEAR SCIENCE & TECHNOLOGY","Score":null,"Total":0}
Determination of limiter design and material composition of MT-II spherical tokamak
Abstract MT-II is a spherical tokamak with a major radius of 0.15 m and a minor radius of 0.09 m, currently under development at the Pakistan Tokamak Plasma Research Institute. It is designed with a higher elongation of 2.67. This paper presents the design and material analysis of the limiter configuration for the MT-II tokamak, which is being carried out in two phases. In the first phase, theoretical studies and calculations are performed to estimate the plasma edge temperature, density, particle velocity, input power, heat flux, heat load and surface temperature on the limiter tile. In the second phase, computational techniques are applied to analyses the material properties, the maximum/minimum surface temperature rise (∆T °C) at stable heat load and power deposition based on theoretical calculations that will help optimize the design parameters of the limiter. The type of material and the surface temperature of the limiter as well as the general design parameters of MT-II are included in the proposed poloidal limiter. The results suggest that crystalline vein graphite is a suitable candidate for the proposed poloidal limiter. A combination of mechanical and electrical feedthrough techniques are used to improve the performance of the limiter. The proposed limiter is able to meet the requirements of MT-II.
期刊介绍:
Kerntechnik is an independent journal for nuclear engineering (including design, operation, safety and economics of nuclear power stations, research reactors and simulators), energy systems, radiation (ionizing radiation in industry, medicine and research) and radiological protection (biological effects of ionizing radiation, the system of protection for occupational, medical and public exposures, the assessment of doses, operational protection and safety programs, management of radioactive wastes, decommissioning and regulatory requirements).