可回收混凝土和陶瓷废料在热拌沥青中的应用

IF 1.4 4区工程技术 Q3 ENGINEERING, CIVIL

Periodica Polytechnica-Civil Engineering Pub Date : 2023-05-03 DOI:10.3311/ppci.21352

S. Serin, Y. Önal, C. Kayadelen, N. Morova

{"title":"可回收混凝土和陶瓷废料在热拌沥青中的应用","authors":"S. Serin, Y. Önal, C. Kayadelen, N. Morova","doi":"10.3311/ppci.21352","DOIUrl":null,"url":null,"abstract":"A significant issue that researchers have been addressing recently is the recycling of various waste materials from different industries. Annually, millions of tons of waste are released. Pollution and safe, cost-effective disposal are critical issues with these waste materials. This study aims to investigate usability of concrete waste (COW) and ceramic waste (CEW) as filler material in Hot Mix Asphalt (HMA). Firstly, in this direction, a series of tests were conducted to determine the optimum bitumen content. Five different bitumen contents (i.e., 4.5%, 5%, 5.5%, 6%, and 6.5%) were used to prepare asphalt concrete samples. The Marshall Stability (MS) test was then performed on the prepared samples using various filler ratios, including limestone (LS), concrete waste (COW), and/or ceramic waste (CEW). Selecting the series of asphalt with 4% filler that has provided the maximum stability, COW or CEW was replaced with LS filler at rates of 25%, 50%, 75%, and 100%. Consequently, the use of COW or CEW as a mineral filler in HMA was found to be suitable.","PeriodicalId":49705,"journal":{"name":"Periodica Polytechnica-Civil Engineering","volume":null,"pages":null},"PeriodicalIF":1.4000,"publicationDate":"2023-05-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Utilization of Recyclable Concrete and Ceramic Waste as Filling Material in Hot Mix Asphalt\",\"authors\":\"S. Serin, Y. Önal, C. Kayadelen, N. Morova\",\"doi\":\"10.3311/ppci.21352\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"A significant issue that researchers have been addressing recently is the recycling of various waste materials from different industries. Annually, millions of tons of waste are released. Pollution and safe, cost-effective disposal are critical issues with these waste materials. This study aims to investigate usability of concrete waste (COW) and ceramic waste (CEW) as filler material in Hot Mix Asphalt (HMA). Firstly, in this direction, a series of tests were conducted to determine the optimum bitumen content. Five different bitumen contents (i.e., 4.5%, 5%, 5.5%, 6%, and 6.5%) were used to prepare asphalt concrete samples. The Marshall Stability (MS) test was then performed on the prepared samples using various filler ratios, including limestone (LS), concrete waste (COW), and/or ceramic waste (CEW). Selecting the series of asphalt with 4% filler that has provided the maximum stability, COW or CEW was replaced with LS filler at rates of 25%, 50%, 75%, and 100%. Consequently, the use of COW or CEW as a mineral filler in HMA was found to be suitable.\",\"PeriodicalId\":49705,\"journal\":{\"name\":\"Periodica Polytechnica-Civil Engineering\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.4000,\"publicationDate\":\"2023-05-03\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Periodica Polytechnica-Civil Engineering\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.3311/ppci.21352\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENGINEERING, CIVIL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Periodica Polytechnica-Civil Engineering","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.3311/ppci.21352","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, CIVIL","Score":null,"Total":0}

引用次数: 0

摘要

研究人员最近一直在解决的一个重要问题是来自不同行业的各种废物的回收。每年，数百万吨的废物被释放出来。污染和安全，具有成本效益的处理是这些废物的关键问题。本研究旨在探讨混凝土废料(COW)和陶瓷废料(CEW)作为热拌沥青(HMA)填充材料的可用性。首先，在该方向上进行了一系列试验，确定了最佳沥青含量。5种不同的沥青含量(即4.5%，5%，5.5%，6%和6.5%)用于制备沥青混凝土样品。然后对制备的样品进行马歇尔稳定性(MS)测试，使用不同的填料比例，包括石灰石(LS)、混凝土废料(COW)和/或陶瓷废料(CEW)。选择具有最大稳定性的含4%填料的沥青系列，以25%、50%、75%和100%的LS填料代替COW或CEW。因此，发现在HMA中使用COW或CEW作为矿物填料是合适的。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Utilization of Recyclable Concrete and Ceramic Waste as Filling Material in Hot Mix Asphalt

A significant issue that researchers have been addressing recently is the recycling of various waste materials from different industries. Annually, millions of tons of waste are released. Pollution and safe, cost-effective disposal are critical issues with these waste materials. This study aims to investigate usability of concrete waste (COW) and ceramic waste (CEW) as filler material in Hot Mix Asphalt (HMA). Firstly, in this direction, a series of tests were conducted to determine the optimum bitumen content. Five different bitumen contents (i.e., 4.5%, 5%, 5.5%, 6%, and 6.5%) were used to prepare asphalt concrete samples. The Marshall Stability (MS) test was then performed on the prepared samples using various filler ratios, including limestone (LS), concrete waste (COW), and/or ceramic waste (CEW). Selecting the series of asphalt with 4% filler that has provided the maximum stability, COW or CEW was replaced with LS filler at rates of 25%, 50%, 75%, and 100%. Consequently, the use of COW or CEW as a mineral filler in HMA was found to be suitable.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Periodica Polytechnica-Civil Engineering 工程技术-工程：土木

CiteScore

3.40

自引率

16.70%

发文量

审稿时长

12 months

期刊介绍： Periodica Polytechnica Civil Engineering is a peer reviewed scientific journal published by the Faculty of Civil Engineering of the Budapest University of Technology and Economics. It was founded in 1957. Publication frequency: quarterly. Periodica Polytechnica Civil Engineering publishes both research and application oriented papers, in the area of civil engineering. The main scope of the journal is to publish original research articles in the wide field of civil engineering, including geodesy and surveying, construction materials and engineering geology, photogrammetry and geoinformatics, geotechnics, structural engineering, architectural engineering, structural mechanics, highway and railway engineering, hydraulic and water resources engineering, sanitary and environmental engineering, engineering optimisation and history of civil engineering. The journal is abstracted by several international databases, see the main page.