辐照对PP/PE共混物结晶动力学的影响

P. Dahal, Youn Cheol Kim
{"title":"辐照对PP/PE共混物结晶动力学的影响","authors":"P. Dahal, Youn Cheol Kim","doi":"10.4156/JDCTA.VOL7.ISSUE11.35","DOIUrl":null,"url":null,"abstract":"Abstract Twin screw extruder at 190 C was used fabricating PP/PE in presence of cross-linking agent in different ratio. PP/PE blends were then irradiated with electron beam with 500 MeV for 5 times. The cross-linking was confirmed with the solution gel analysis, Fourier Transformation infrared spectrum and thermal analysis. Non-isothermal crystallization kinetics of PP/PE blends were analyzed as proposed by Ozawa. The extending components were 2, 3 and 4 depending upon the samples composition and modification suggesting different growth geometrics, rod, disk, and sphere type. Differential scanning calorimetry was used to obtain the melting and crystallization properties of the PP/PE blend.","PeriodicalId":13797,"journal":{"name":"International Journal of Digital Content Technology and Its Applications","volume":"64 1","pages":"280-286"},"PeriodicalIF":0.0000,"publicationDate":"2013-07-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effect of Irradiation on the Crystallization Kinetics of PP/PE Blends\",\"authors\":\"P. Dahal, Youn Cheol Kim\",\"doi\":\"10.4156/JDCTA.VOL7.ISSUE11.35\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Abstract Twin screw extruder at 190 C was used fabricating PP/PE in presence of cross-linking agent in different ratio. PP/PE blends were then irradiated with electron beam with 500 MeV for 5 times. The cross-linking was confirmed with the solution gel analysis, Fourier Transformation infrared spectrum and thermal analysis. Non-isothermal crystallization kinetics of PP/PE blends were analyzed as proposed by Ozawa. The extending components were 2, 3 and 4 depending upon the samples composition and modification suggesting different growth geometrics, rod, disk, and sphere type. Differential scanning calorimetry was used to obtain the melting and crystallization properties of the PP/PE blend.\",\"PeriodicalId\":13797,\"journal\":{\"name\":\"International Journal of Digital Content Technology and Its Applications\",\"volume\":\"64 1\",\"pages\":\"280-286\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2013-07-31\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Digital Content Technology and Its Applications\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.4156/JDCTA.VOL7.ISSUE11.35\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Digital Content Technology and Its Applications","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.4156/JDCTA.VOL7.ISSUE11.35","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

摘要采用双螺杆挤出机在190℃下以不同比例添加交联剂制备PP/PE。然后用500 MeV的电子束辐照PP/PE共混物5次。通过溶液凝胶分析、傅里叶变换红外光谱和热分析证实了交联的存在。根据Ozawa的建议,分析了PP/PE共混物的非等温结晶动力学。根据样品组成和改性的不同,延伸组分分别为2、3和4,表明不同的生长几何形状,棒状、圆盘状和球形。采用差示扫描量热法测定了PP/PE共混物的熔融和结晶性能。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Effect of Irradiation on the Crystallization Kinetics of PP/PE Blends
Abstract Twin screw extruder at 190 C was used fabricating PP/PE in presence of cross-linking agent in different ratio. PP/PE blends were then irradiated with electron beam with 500 MeV for 5 times. The cross-linking was confirmed with the solution gel analysis, Fourier Transformation infrared spectrum and thermal analysis. Non-isothermal crystallization kinetics of PP/PE blends were analyzed as proposed by Ozawa. The extending components were 2, 3 and 4 depending upon the samples composition and modification suggesting different growth geometrics, rod, disk, and sphere type. Differential scanning calorimetry was used to obtain the melting and crystallization properties of the PP/PE blend.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信