INVESTIGATION OF MODIFIED POLYACRYLAMIDE FOR OIL DISPLACEMENT

At present, the use of surfactants and water-soluble polyelectrolytes, which act as stabilizing and selective agents, is inextricably linked with the successful solution of the technological issues in the world of chemical, oil and other industries. The purpose of the work is to synthesize and study the physicochemical properties of modified polyacrylamide with gossypol resin and further crosslinking in the presence of potassium persulfate and sodium sulphate to displace oil. Methods. To establish the spectral characteristics of the modified PAA, IR spectra have been taken on an IR-Fourier spectrometer. For the structural-elemental composition (SEM), a Jeol JSM-6490l V electron microscope has been used. The viscosity of modified PAA solutions has been measured in a Ubellode capillary viscometer with a hanging level. Results and discussion. The studies, carried out by the authors of the study of the colloid-chemical properties of polymer composites, allow us to conclude that the reagents obtained during the hydrolysis of vat residues of fatty acids distillation with sodium hydroxide with further cross-linking in the presence of potassium persulfate and sodium sulphate have good surfaceactive and emulsifying properties, which is important when displacing oil from layers. The surface tension of polymer compositions has been studied. With an increase in the concentration of the solution, the surface tension decreases, i.e., the surface activity increases. Conclusion. The research results show that the injection of a polymer reagent solution can increase the oil displacement efficiency by 6-7%.