Research note: A method for studying local differences in ruminal fermentation in dairy cattle

A method was developed for studying local differences in ruminai fermentation. The developed sampler consisted of an acrylic glass container (460 cm3) with an aperture for digesta sampling, which could be opened and closed by the scaled “T”; rod. The scale was a reference for defined rumen layers: top, middle, 5 to 10 cm and 25 to 35 cm beneath the top of particles mat, respectively, and bottom 5 to 10 cm above the rumen floor. The repeatability of the method was proved in two rumen cannulated cows. Particle/fluid ratio, pH and sample amount were measured 2 to 21/2 h after morning feeding in four replicates each day (over 5 days), rumen layer and animal. No significant differences between replicates were observed. The coefficients of variation (CV) of the particle/fluid ratio varied between 8.7% and 13.6%. Top layer had higher CV than middle and bottom layer. CV of pH ranged between 0.59% and 1.27%. The developed method of sampling showed satisfactory repeatability for investigation of digesta properties and fermentation in different rumen layers.