Double-sided permeable wave absorber

A new double-sided electromagnetic wave absorber allowing transmission is proposed. In the conventional permeable wave absorber, a resistive film is attached to a lossless dielectric layer. However, this is not nonreflective for an incident wave on the resistive film side. In the present paper, a basic structure is considered in which there is no reflection on both sides of the absorber. A simple structure made of two resistive films inserted between three dielectric layers is proposed. The nonreflection condition of the present wave absorber is derived by means of the equivalent circuit, and the reflection and transmission characteristics are derived for given permittivities of the dielectric layers. It is found that the bandwidth of the reflection coefficient does not significantly depend on the permittivity of the inner layer and that the permittivity of the outer layers is increased and that of the inner layer is decreased in order to make the transmission coefficient smaller. The wave absorber is fabricated and measured for confirmation of the validity of the theory. © 2007 Wiley Periodicals, Inc. Electron Comm Jpn Pt 1, 90(6): 1–8, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/ecja.20369