Simulation of Combined Stresses and Stress Concentration Factor Effects on a Femur Cortical Bones

The purposes of this article were to obtain mechanical properties of the dry femur cortical bone samples through a tensile load and stress concentration factor approach and to provide simulations to predict experimental behaviors based on manipulations of certain properties and parameters of the biomaterial. Since bone samples have characteristics and geometries, the development of a mathematical model was necessary to describe the combination of stresses interacting in the bone when a tension load is applied. The samples have average diameters and lengths of 0.5 and 2 inches respectively and were tested using a 10 kN Universal Tensile Machine to determine mechanical properties such as yield and ultimate stress, young module, and fracture, among others. Several simulations were conducted to evaluate failure criteria like “Von Mises”, “Tresca” and “Tsai-Wu”. Finally, was concluded that 83% of the data obtained from the 22 samples observed in the “Stress-Strain” charts showed a directly proportional relationship.