面向认知无线电应用的可重构带缺口天线设计

H. Lalj, H. Griguer, M. Drissi
{"title":"面向认知无线电应用的可重构带缺口天线设计","authors":"H. Lalj, H. Griguer, M. Drissi","doi":"10.4236/WET.2014.53011","DOIUrl":null,"url":null,"abstract":"In this paper, an antenna with \nreconfigurable band notches, for cognitive radio applications, is proposed. The \nantenna can be operated as ultra wideband, and is reconfigurable in terms of \nthe ability to select a notched band in the SRR resonant frequency. The reconfigurable \nband notches are induced using a band-stop filter based on split-ring \nresonators (SRRs), and are controlled using electronic switches mounted over \nthe SRRs. For this sake, the design of the band-stop filter is proposed. A \nprototype of filter is fabricated and measured. The incorporation of a band-stop \nfilter, into a wideband antenna, is then looked into. The proposed antenna is \ndesigned and simulated using Ansoft HFSS. A prototype of the antenna is \nfabricated and measured. A good analogy between simulated and measured results \nis obtained.","PeriodicalId":68067,"journal":{"name":"无线工程与技术(英文)","volume":"2014 1","pages":"99-105"},"PeriodicalIF":0.0000,"publicationDate":"2014-07-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"7","resultStr":"{\"title\":\"Design of Reconfigurable Band Notches Antenna for Cognitive Radio Applications\",\"authors\":\"H. Lalj, H. Griguer, M. Drissi\",\"doi\":\"10.4236/WET.2014.53011\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this paper, an antenna with \\nreconfigurable band notches, for cognitive radio applications, is proposed. The \\nantenna can be operated as ultra wideband, and is reconfigurable in terms of \\nthe ability to select a notched band in the SRR resonant frequency. The reconfigurable \\nband notches are induced using a band-stop filter based on split-ring \\nresonators (SRRs), and are controlled using electronic switches mounted over \\nthe SRRs. For this sake, the design of the band-stop filter is proposed. A \\nprototype of filter is fabricated and measured. The incorporation of a band-stop \\nfilter, into a wideband antenna, is then looked into. The proposed antenna is \\ndesigned and simulated using Ansoft HFSS. A prototype of the antenna is \\nfabricated and measured. A good analogy between simulated and measured results \\nis obtained.\",\"PeriodicalId\":68067,\"journal\":{\"name\":\"无线工程与技术(英文)\",\"volume\":\"2014 1\",\"pages\":\"99-105\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2014-07-11\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"7\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"无线工程与技术(英文)\",\"FirstCategoryId\":\"1093\",\"ListUrlMain\":\"https://doi.org/10.4236/WET.2014.53011\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"无线工程与技术(英文)","FirstCategoryId":"1093","ListUrlMain":"https://doi.org/10.4236/WET.2014.53011","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 7

摘要

本文提出了一种具有可重构带缺口的天线,用于认知无线电应用。该天线可以作为超宽带工作,并且在SRR谐振频率中选择陷波带的能力方面是可重构的。可重构的带陷波由基于分环谐振器(SRRs)的带阻滤波器引起,并通过安装在SRRs上的电子开关进行控制。为此,提出了带阻滤波器的设计。制作了滤波器样机并进行了测试。结合带阻滤波器,进入宽带天线,然后进行了研究。采用Ansoft HFSS软件对该天线进行了设计和仿真。制作了天线样机并进行了测量。模拟结果与实测结果有很好的相似性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Design of Reconfigurable Band Notches Antenna for Cognitive Radio Applications
In this paper, an antenna with reconfigurable band notches, for cognitive radio applications, is proposed. The antenna can be operated as ultra wideband, and is reconfigurable in terms of the ability to select a notched band in the SRR resonant frequency. The reconfigurable band notches are induced using a band-stop filter based on split-ring resonators (SRRs), and are controlled using electronic switches mounted over the SRRs. For this sake, the design of the band-stop filter is proposed. A prototype of filter is fabricated and measured. The incorporation of a band-stop filter, into a wideband antenna, is then looked into. The proposed antenna is designed and simulated using Ansoft HFSS. A prototype of the antenna is fabricated and measured. A good analogy between simulated and measured results is obtained.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
118
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信