3D Scanning of Porto Alegre Museum Artifacts: The Crockery of the Rocco Bakery

Antiques usually require careful handling, so these objects cannot be made available to the general public and are handled only by restoration specialists. This article focuses on the preservation of antiquities in terms of cultural heritage and the availability of these objects for access by visitors, it describes and evaluates the development of a method to support the digitisation of objects considered solids of revolution. The artifacts were provided by the Museu Joaquim José Felizardo in the city of Porto Alegre, Brazil, and were used to set the table in the former Confeitaria Rocco (bakery). The 3D process consisted of the following steps: laser scanning, data processing of the coordinates obtained from the surface of the object into point clouds, creation of the virtual model, creation of a physical model using additive manufacturing, and evaluation of the physical model in comparison with the original artifact. The obtained results show that highly accurate models can be created using the proposed method. Therefore, virtual data can be obtained for the conservation, restoration and creation of replicas for studies and accessibility.