PEEK材料五轴粗加工的切削力系数

Q3 Engineering

International Journal of Mechanical Engineering and Robotics Research Pub Date : 2023-01-01 DOI:10.18178/ijmerr.12.1.57-63

H. H. Sutrisno, Triyono

{"title":"PEEK材料五轴粗加工的切削力系数","authors":"H. H. Sutrisno, Triyono","doi":"10.18178/ijmerr.12.1.57-63","DOIUrl":null,"url":null,"abstract":"— This study aims to provide the value of the cutting force coefficient on the rough 5 axis milling machining process using flat end 4 flute tools on the peek material. The cutting force coefficient is an experimental machining parameter obtained from modeling. The machining process with several spindle rotational speeds produces a morphology chip, which is then used as modeling information to form a cutting force coefficient graph from an experimental stage. Using 5 variations of spindle speed and constant depth of cut, the results obtained for the thickness of the chip resulted in differences in the coefficient of cutting force. At the highest spindle speed, the chip thickness resulting from the machining process is reduced compared to the lowest spindle rotation. Consequently, the value of the cutting force coefficient will increase compared to other lower spindle speeds.","PeriodicalId":37784,"journal":{"name":"International Journal of Mechanical Engineering and Robotics Research","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Cutting Force Coefficient for 5 Axis Rough Machining Process on PEEK Material\",\"authors\":\"H. H. Sutrisno, Triyono\",\"doi\":\"10.18178/ijmerr.12.1.57-63\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"— This study aims to provide the value of the cutting force coefficient on the rough 5 axis milling machining process using flat end 4 flute tools on the peek material. The cutting force coefficient is an experimental machining parameter obtained from modeling. The machining process with several spindle rotational speeds produces a morphology chip, which is then used as modeling information to form a cutting force coefficient graph from an experimental stage. Using 5 variations of spindle speed and constant depth of cut, the results obtained for the thickness of the chip resulted in differences in the coefficient of cutting force. At the highest spindle speed, the chip thickness resulting from the machining process is reduced compared to the lowest spindle rotation. Consequently, the value of the cutting force coefficient will increase compared to other lower spindle speeds.\",\"PeriodicalId\":37784,\"journal\":{\"name\":\"International Journal of Mechanical Engineering and Robotics Research\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2023-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Mechanical Engineering and Robotics Research\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.18178/ijmerr.12.1.57-63\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"Engineering\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Mechanical Engineering and Robotics Research","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.18178/ijmerr.12.1.57-63","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Engineering","Score":null,"Total":0}

引用次数: 0

摘要

-本研究旨在提供在peek材料上使用平端4槽刀具的粗5轴铣削加工过程中的切削力系数值。切削力系数是通过建模得到的实验加工参数。在不同转速的加工过程中产生一个形貌切屑，然后将其作为建模信息形成实验阶段的切削力系数图。采用5种不同的主轴转速和一定的切削深度，得到了切屑厚度对切削力系数的影响。在最高的主轴转速下，与最低的主轴转速相比，加工过程产生的切屑厚度减少了。因此，切削力系数的值将增加相比其他较低的主轴速度。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Cutting Force Coefficient for 5 Axis Rough Machining Process on PEEK Material

— This study aims to provide the value of the cutting force coefficient on the rough 5 axis milling machining process using flat end 4 flute tools on the peek material. The cutting force coefficient is an experimental machining parameter obtained from modeling. The machining process with several spindle rotational speeds produces a morphology chip, which is then used as modeling information to form a cutting force coefficient graph from an experimental stage. Using 5 variations of spindle speed and constant depth of cut, the results obtained for the thickness of the chip resulted in differences in the coefficient of cutting force. At the highest spindle speed, the chip thickness resulting from the machining process is reduced compared to the lowest spindle rotation. Consequently, the value of the cutting force coefficient will increase compared to other lower spindle speeds.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

International Journal of Mechanical Engineering and Robotics Research Engineering-Mechanical Engineering

CiteScore

2.80

自引率

0.00%

发文量

期刊介绍： International Journal of Mechanical Engineering and Robotics Research. IJMERR is a scholarly peer-reviewed international scientific journal published bimonthly, focusing on theories, systems, methods, algorithms and applications in mechanical engineering and robotics. It provides a high profile, leading edge forum for academic researchers, industrial professionals, engineers, consultants, managers, educators and policy makers working in the field to contribute and disseminate innovative new work on Mechanical Engineering and Robotics Research.