引入钙钛矿量子点中间层的光电倍增型高eqe带宽产品有机光电探测器

IF 18.5 1区 材料科学 Q1 CHEMISTRY, MULTIDISCIPLINARY
Minyoung Jeong, Se Gyo Han, Woong Sung, Seunghyun Kim, Jiwoo Min, Mi Kyong Kim, Wookjin Choi, Hansol Lee, Dongki Lee, Min Kim, Kilwon Cho
{"title":"引入钙钛矿量子点中间层的光电倍增型高eqe带宽产品有机光电探测器","authors":"Minyoung Jeong,&nbsp;Se Gyo Han,&nbsp;Woong Sung,&nbsp;Seunghyun Kim,&nbsp;Jiwoo Min,&nbsp;Mi Kyong Kim,&nbsp;Wookjin Choi,&nbsp;Hansol Lee,&nbsp;Dongki Lee,&nbsp;Min Kim,&nbsp;Kilwon Cho","doi":"10.1002/adfm.202300695","DOIUrl":null,"url":null,"abstract":"<p>A photomultiplication (PM)-type organic photodetector (OPD) that exploits the ionic motion in CsPbI<sub>3</sub> perovskite quantum dots (QDs) is demonstrated. The device uses a QD monolayer as a PM-inducing interlayer and a donor–acceptor bulk heterojunction (BHJ) layer as a photoactive layer. When the device is illuminated, negative ions in the CsPbI<sub>3</sub> QD migrate and accumulate near the interface between the QDs and the electrode; these processes induce hole injection from the electrode and yield the PM phenomenon with an external quantum efficiency (EQE) &gt;2000% at a 3 V applied bias. It is confirmed that the ionic motion of the CsPbI<sub>3</sub> QDs can induce a shift in the work function of the QD/electrode interface and that the dynamics of ionic motion determines the response speed of the device. The PM OPD showed a large EQE-bandwidth product &gt;10<sup>6</sup> Hz with a −3 dB frequency of 125 kHz at 3 V, which is one of the highest response speeds reported for a PM OPD. The PM-inducing strategy that exploits ionic motion of the interlayer is a potential approach to achieving high-efficiency PM OPDs.</p>","PeriodicalId":112,"journal":{"name":"Advanced Functional Materials","volume":null,"pages":null},"PeriodicalIF":18.5000,"publicationDate":"2023-03-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Photomultiplication-Type Organic Photodetectors with High EQE-Bandwidth Product by Introducing a Perovskite Quantum Dot Interlayer\",\"authors\":\"Minyoung Jeong,&nbsp;Se Gyo Han,&nbsp;Woong Sung,&nbsp;Seunghyun Kim,&nbsp;Jiwoo Min,&nbsp;Mi Kyong Kim,&nbsp;Wookjin Choi,&nbsp;Hansol Lee,&nbsp;Dongki Lee,&nbsp;Min Kim,&nbsp;Kilwon Cho\",\"doi\":\"10.1002/adfm.202300695\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>A photomultiplication (PM)-type organic photodetector (OPD) that exploits the ionic motion in CsPbI<sub>3</sub> perovskite quantum dots (QDs) is demonstrated. The device uses a QD monolayer as a PM-inducing interlayer and a donor–acceptor bulk heterojunction (BHJ) layer as a photoactive layer. When the device is illuminated, negative ions in the CsPbI<sub>3</sub> QD migrate and accumulate near the interface between the QDs and the electrode; these processes induce hole injection from the electrode and yield the PM phenomenon with an external quantum efficiency (EQE) &gt;2000% at a 3 V applied bias. It is confirmed that the ionic motion of the CsPbI<sub>3</sub> QDs can induce a shift in the work function of the QD/electrode interface and that the dynamics of ionic motion determines the response speed of the device. The PM OPD showed a large EQE-bandwidth product &gt;10<sup>6</sup> Hz with a −3 dB frequency of 125 kHz at 3 V, which is one of the highest response speeds reported for a PM OPD. The PM-inducing strategy that exploits ionic motion of the interlayer is a potential approach to achieving high-efficiency PM OPDs.</p>\",\"PeriodicalId\":112,\"journal\":{\"name\":\"Advanced Functional Materials\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":18.5000,\"publicationDate\":\"2023-03-28\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Advanced Functional Materials\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://onlinelibrary.wiley.com/doi/10.1002/adfm.202300695\",\"RegionNum\":1,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"CHEMISTRY, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Advanced Functional Materials","FirstCategoryId":"88","ListUrlMain":"https://onlinelibrary.wiley.com/doi/10.1002/adfm.202300695","RegionNum":1,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"CHEMISTRY, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

摘要

介绍了一种利用CsPbI3钙钛矿量子点(QDs)离子运动的光电倍增型有机光电探测器(OPD)。该装置使用QD单层作为pm诱导中间层,并使用供体-受体体异质结(BHJ)层作为光活性层。当器件被照射时,CsPbI3量子点中的负离子在量子点与电极之间的界面附近迁移和积累;这些过程从电极诱导空穴注入,并在施加3v偏置时产生具有2000%外量子效率(EQE)的PM现象。证实了CsPbI3量子点的离子运动可以引起量子点/电极界面功函数的移位,离子运动的动力学决定了器件的响应速度。PM OPD显示出较大的eq -带宽乘积>106 Hz,在3 V时- 3 dB频率为125 kHz,这是PM OPD报道的最高响应速度之一。利用中间层离子运动的PM诱导策略是实现高效PM opd的潜在方法。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Photomultiplication-Type Organic Photodetectors with High EQE-Bandwidth Product by Introducing a Perovskite Quantum Dot Interlayer

A photomultiplication (PM)-type organic photodetector (OPD) that exploits the ionic motion in CsPbI3 perovskite quantum dots (QDs) is demonstrated. The device uses a QD monolayer as a PM-inducing interlayer and a donor–acceptor bulk heterojunction (BHJ) layer as a photoactive layer. When the device is illuminated, negative ions in the CsPbI3 QD migrate and accumulate near the interface between the QDs and the electrode; these processes induce hole injection from the electrode and yield the PM phenomenon with an external quantum efficiency (EQE) >2000% at a 3 V applied bias. It is confirmed that the ionic motion of the CsPbI3 QDs can induce a shift in the work function of the QD/electrode interface and that the dynamics of ionic motion determines the response speed of the device. The PM OPD showed a large EQE-bandwidth product >106 Hz with a −3 dB frequency of 125 kHz at 3 V, which is one of the highest response speeds reported for a PM OPD. The PM-inducing strategy that exploits ionic motion of the interlayer is a potential approach to achieving high-efficiency PM OPDs.

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Advanced Functional Materials
Advanced Functional Materials 工程技术-材料科学:综合
CiteScore
29.50
自引率
4.20%
发文量
2086
审稿时长
2.1 months
期刊介绍: Firmly established as a top-tier materials science journal, Advanced Functional Materials reports breakthrough research in all aspects of materials science, including nanotechnology, chemistry, physics, and biology every week. Advanced Functional Materials is known for its rapid and fair peer review, quality content, and high impact, making it the first choice of the international materials science community.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信