家用燃气灶具效率及消耗量的计量评定

Q3 Engineering
Rosana Medeiros Moreira, E. C. de Oliveira
{"title":"家用燃气灶具效率及消耗量的计量评定","authors":"Rosana Medeiros Moreira, E. C. de Oliveira","doi":"10.1051/ijmqe/2021015","DOIUrl":null,"url":null,"abstract":"This study evaluates the results of efficiency and consumption tests on gas household appliances and their influence on the classification of the Brazilian Labeling Program. Historically, based on results in interlaboratory comparisons, there is a doubt concerning if the algorithms correct properly the differences among different altitudes. Data from efficiency and consumption tests were collected in two cities with different altitudes, and the proposed calculation methodology is compared with the traditional one. The results show that the arithmetic average, used in the calculation of the efficiency of the burners on the stove table, justifies being replaced by the weighted average, after evaluating the behaviour of the data and treating outliers. The uncertainty of the efficiency and consumption tests was not enough to change the classification range of the product's energy efficiency label. It is concluded that statistically a difference is observed between the results at sea level and at altitude above sea level; since the tests were applied by the same operator using the same apparatus, the only parameter that leaves a doubt is the algorithms for the correction of the altitude. Shortly, this study will be part of a revised Brazilian standard.","PeriodicalId":38371,"journal":{"name":"International Journal of Metrology and Quality Engineering","volume":"1 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Metrological evaluation of efficiency and consumption of domestic gas cooking appliances\",\"authors\":\"Rosana Medeiros Moreira, E. C. de Oliveira\",\"doi\":\"10.1051/ijmqe/2021015\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This study evaluates the results of efficiency and consumption tests on gas household appliances and their influence on the classification of the Brazilian Labeling Program. Historically, based on results in interlaboratory comparisons, there is a doubt concerning if the algorithms correct properly the differences among different altitudes. Data from efficiency and consumption tests were collected in two cities with different altitudes, and the proposed calculation methodology is compared with the traditional one. The results show that the arithmetic average, used in the calculation of the efficiency of the burners on the stove table, justifies being replaced by the weighted average, after evaluating the behaviour of the data and treating outliers. The uncertainty of the efficiency and consumption tests was not enough to change the classification range of the product's energy efficiency label. It is concluded that statistically a difference is observed between the results at sea level and at altitude above sea level; since the tests were applied by the same operator using the same apparatus, the only parameter that leaves a doubt is the algorithms for the correction of the altitude. Shortly, this study will be part of a revised Brazilian standard.\",\"PeriodicalId\":38371,\"journal\":{\"name\":\"International Journal of Metrology and Quality Engineering\",\"volume\":\"1 1\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2021-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Metrology and Quality Engineering\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1051/ijmqe/2021015\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"Engineering\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Metrology and Quality Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1051/ijmqe/2021015","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Engineering","Score":null,"Total":0}
引用次数: 0

摘要

本研究评估燃气家用电器的效率和消耗测试结果及其对巴西标签计划分类的影响。从历史上看,基于实验室间比较的结果,对于算法是否正确地纠正不同高度之间的差异存在疑问。在两个不同海拔的城市进行了效率和消耗测试,并与传统的计算方法进行了比较。结果表明,在对数据的行为进行评价和处理异常值后,计算灶台上燃烧器效率时使用的算术平均值可以被加权平均值所取代。能效和能耗测试的不确定度不足以改变产品能效标签的分类范围。在统计上,海平面和海拔高度的结果存在差异;由于测试是由同一操作员使用同一设备进行的,因此唯一值得怀疑的参数是校正高度的算法。不久,这项研究将成为修订后的巴西标准的一部分。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Metrological evaluation of efficiency and consumption of domestic gas cooking appliances
This study evaluates the results of efficiency and consumption tests on gas household appliances and their influence on the classification of the Brazilian Labeling Program. Historically, based on results in interlaboratory comparisons, there is a doubt concerning if the algorithms correct properly the differences among different altitudes. Data from efficiency and consumption tests were collected in two cities with different altitudes, and the proposed calculation methodology is compared with the traditional one. The results show that the arithmetic average, used in the calculation of the efficiency of the burners on the stove table, justifies being replaced by the weighted average, after evaluating the behaviour of the data and treating outliers. The uncertainty of the efficiency and consumption tests was not enough to change the classification range of the product's energy efficiency label. It is concluded that statistically a difference is observed between the results at sea level and at altitude above sea level; since the tests were applied by the same operator using the same apparatus, the only parameter that leaves a doubt is the algorithms for the correction of the altitude. Shortly, this study will be part of a revised Brazilian standard.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
International Journal of Metrology and Quality Engineering
International Journal of Metrology and Quality Engineering Engineering-Safety, Risk, Reliability and Quality
CiteScore
1.70
自引率
0.00%
发文量
8
审稿时长
8 weeks
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信