金刚石与碱金属的相互作用及其在金刚石加工中的应用

IF 0.5 4区工程技术 Q4 ENGINEERING, ELECTRICAL & ELECTRONIC

Electronics and Communications in Japan Pub Date : 2023-02-07 DOI:10.1002/ecj.12385

Toshihiro Shimada, Hiroki Takehana, Ichiro Yamane

引用次数: 0

摘要

通过实验和计算研究了金刚石表面与碱金属的相互作用。在600°C以上，Li与金刚石反应，观察到（100）表面的显著蚀刻。尝试将这种蚀刻反应应用于金刚石工具的放电加工。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Interaction between diamond and alkali metals and its application to machining of diamond

The interaction between diamond surfaces and alkali metals was studied experimentally and computationally. Li reacted with diamond above 600°C and significant etching of (100) surface was observed. An attempt was made to apply this etching reaction for electrical discharge machining of diamond tools.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Electronics and Communications in Japan 工程技术-工程：电子与电气

CiteScore

0.60

自引率

0.00%

发文量

审稿时长

6-12 weeks

期刊介绍： Electronics and Communications in Japan (ECJ) publishes papers translated from the Transactions of the Institute of Electrical Engineers of Japan 12 times per year as an official journal of the Institute of Electrical Engineers of Japan (IEEJ). ECJ aims to provide world-class researches in highly diverse and sophisticated areas of Electrical and Electronic Engineering as well as in related disciplines with emphasis on electronic circuits, controls and communications. ECJ focuses on the following fields: - Electronic theory and circuits, - Control theory, - Communications, - Cryptography, - Biomedical fields, - Surveillance, - Robotics, - Sensors and actuators, - Micromachines, - Image analysis and signal analysis, - New materials. For works related to the science, technology, and applications of electric power, please refer to the sister journal Electrical Engineering in Japan (EEJ).