Evaluation of measurement uncertainty when calibrating power analyzers of high-frequency signals in coaxial paths

Implementation of modern requirements for the quality and stability of radio communications, including the required data rate in industrial and atmospheric jamming, is impossible without accurate measurements of signal power at the output of transmitting devices in the transmitter-antenna section. Such measurements are performed using power analyzers that measure both incident and reflected waves. These parameters allow calculating the standing wave ratio, which makes it possible to ensure optimal coordination of the transmitter with antenna, the required power modes and the efficiency of the transmitter as a whole. The paper presents main results of the research on the evaluation of measurement uncertainty when calibrating of the analyzers of the throughput power of high-frequency signals in coaxial paths. The structural scheme and equations (model) of measurements, and features of calculating uncertainty budget are described. The basic principles for obtaining continuous calibration results in the whole range of measurements are revealed. An example of presenting calibration results in graphical form is given. The content of quantitative and qualitative indicators of corrections that must be taken into account during calibration to achieve the highest accuracy of measurements is revealed. It is expedient to use practical results of researches on calibration of throughput power meters in many areas connected with telecommunications and transmission of radio signals.