Developing Geopolymer Concrete by Using Ferronickel Slag and Ground-Granulated Blast-Furnace Slag

Geopolymer concrete is gaining recognition as an environmentally friendly alternative to traditional cement-based materials, offering potential solutions for reducing the carbon emissions of the construction industry. This study aims to develop GGBFS–FNS geopolymers utilising ferronickel slag (FNS) and ground-granulated blast-furnace slag (GGBFS). Ground FNS (GFNS) is a potential candidate for replacing fly ash in geopolymers. This research aims to develop for the first time a GGBFS–FNS alkali-activated concrete. Numerous trials were conducted including different GGBFS–FNS blend percentages, several chemical admixtures and varying activator concentrations to develop the optimal binder mix composition. The effects of different chemical admixtures on the properties of geopolymer pastes, mortars, and concretes were investigated. The study evaluated setting time, compressive strength, shrinkage, and physical and durability properties. The results indicate that conventional admixtures have limited impact on the setting time, while increasing the water/solid ratio and decreasing the GGBFS content could extend the initial and final setting times. The presence of FNS aggregate could improve the compressive strength of geopolymer mortars. The water absorber admixture was highly effective in reducing shrinkage and increasing chloride diffusion resistance. The geopolymer mix containing 50 wt.% GFNS and 50 wt.% GGBFS with the presence of the water absorber admixture presented high chloride diffusion resistance, non-reactivity to the alkali–silica reaction and high sulphate resistance. Overall, the GGBFS–FNS geopolymers exhibited promising potential for engineering applications as an environmentally friendly material, particularly in aggressive environments.