The performance analysis of dusty photovoltaic panel

Solar photovoltaic power is widely utilized in the energy industry. The performance of solar panels is influenced by different variables, including solar radiation, temperature, wind speed, relative humidity and the presence of haze or dirt. Outdoor solar panels are particularly susceptible to a decrease in energy efficiency due to the accumulation of dust particles in the air, which occurs as a result of natural weather conditions. The extent of dust deposition is primarily determined by factors such as the tilt angle of the panel, wind direction, cleaning frequency as well as local meteorological and geographical conditions. The dust on the solar cell glazing reduces the optical transmittance of the light beam, causing shadowing and diminishing the energy conversion productivity of the panels. Sand storms, pollution levels and snow accumulations all significantly impact the photovoltaic panel performance. These circumstances reduce the efficiency of solar panels. The experiment was carried out on two identical dust-accumulated and dust-free panels. The evaluation was carried out in two different situations on the off-grid stand-alone system: in a simulated atmosphere and in an open space during the day. The current-voltage curves have been developed for both panels at various tilt degrees. The features provide sufficient information to analyse the performance of the panels under consideration. The measurements demonstrate that as dust collects on the panel’s surface, the average output power and short circuit current decrease dramatically. The installation tilt angle affected the ratio of efficiency and average power outputs of dusty and clean panels.