Dimming Level Improvement Method Through Simple Mapping Error Correction Code in Visible Light Communication

Since the visible light communication (VLC) has to perform the functions of communication and illumination at the same time, a method for communication as well as lighting is needed. In this paper, when text data is transmitted through visible light communication, the level of illumination dimming according to the frequency of occurrence of alphabets in sentences is analyzed, and a method of improving the dimming level and Bit Error Rate (BER) performance through error correction codes generated during data transmission is studied. Visible light communication systems must perform both communication and lighting functions, so not only communication but also a method for the lighting role is needed. When transferring data (transfer text), the frequency of occurrence of alphabets in sentences is different. Depending on the frequency of occurrence of these alphabetic characters, if there are many ‘0’s in the code to be transmitted, the dimming level will be lowered and flicker will occur. Also, when a 1-bit error occurs, the alphabet code itself is changed. To solve this problem, an error correction code using parity bits has been added. Through this, it was confirmed that the overall dimming level and Bit Error Rate (BER) performance were improved. Also, in visible light communication, the function of lighting is closely related to the performance of the overall system. As we have seen above, when there is a continuous zero period, the function of the lighting is severely degraded. This reduces the performance of the entire system, not just the lighting. Therefore, the dimming level and BER performance were improved by improving the performance through the algorithm and error correction code to improve the overall dimming level.