A. Vali, Seyed Mohammad Hassan Hosseni, J. Olamaei
{"title":"不平衡网络条件下ESO控制器对DFIG低电压穿越能力的改进","authors":"A. Vali, Seyed Mohammad Hassan Hosseni, J. Olamaei","doi":"10.52547/MJEE.15.1.53","DOIUrl":null,"url":null,"abstract":"Under unbalanced grid condition, in a Doubly-Fed Induction Generator (DFIG), voltage, current, and flux of the stator become asymmetric. Therefore, active-reactive power and torque will be oscillating. In DFIG controlling Rotor Side Converter (RSC) aims to eliminate power and torque oscillations. However, simultaneous elimination of the power and torque oscillations is not possible. Also, Grid Side Converter (GSC) aims to regulate DC-Link voltage. In this paper, in order to regulate DC-Link voltage, an Extended State Observer (ESO) based on a Generalized Proportional-Integral (GPI) controller, is employed. In this controlling method, DC-Link voltage is controlled without measuring the GSC current, and due to using the GPI controller, the improved dynamic response is resistant against voltage changes, and the settling time is reduced. To improve the transient stability and Low Voltage Fault Ride Through (LVRT) capability of DFIG, Statistic Fault Current Limiter (S-FCL) and Magnetic Energy Storage Fault Current Limiter (MES-FCL) are proposed in this paper. The proposed FCL does not only limit the fault current but also fasten voltage recovery. The simulations are implemented by MATLAB software in the synchronous positive and negative sequence reference (d-q).","PeriodicalId":37804,"journal":{"name":"Majlesi Journal of Electrical Engineering","volume":" ","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2021-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Improved Low Voltage Ride-Through Capability of DFIG with ESO Controller under Unbalanced Network Conditions\",\"authors\":\"A. Vali, Seyed Mohammad Hassan Hosseni, J. Olamaei\",\"doi\":\"10.52547/MJEE.15.1.53\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Under unbalanced grid condition, in a Doubly-Fed Induction Generator (DFIG), voltage, current, and flux of the stator become asymmetric. Therefore, active-reactive power and torque will be oscillating. In DFIG controlling Rotor Side Converter (RSC) aims to eliminate power and torque oscillations. However, simultaneous elimination of the power and torque oscillations is not possible. Also, Grid Side Converter (GSC) aims to regulate DC-Link voltage. In this paper, in order to regulate DC-Link voltage, an Extended State Observer (ESO) based on a Generalized Proportional-Integral (GPI) controller, is employed. In this controlling method, DC-Link voltage is controlled without measuring the GSC current, and due to using the GPI controller, the improved dynamic response is resistant against voltage changes, and the settling time is reduced. To improve the transient stability and Low Voltage Fault Ride Through (LVRT) capability of DFIG, Statistic Fault Current Limiter (S-FCL) and Magnetic Energy Storage Fault Current Limiter (MES-FCL) are proposed in this paper. The proposed FCL does not only limit the fault current but also fasten voltage recovery. The simulations are implemented by MATLAB software in the synchronous positive and negative sequence reference (d-q).\",\"PeriodicalId\":37804,\"journal\":{\"name\":\"Majlesi Journal of Electrical Engineering\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2021-03-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Majlesi Journal of Electrical Engineering\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.52547/MJEE.15.1.53\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"Engineering\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Majlesi Journal of Electrical Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.52547/MJEE.15.1.53","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"Engineering","Score":null,"Total":0}
Improved Low Voltage Ride-Through Capability of DFIG with ESO Controller under Unbalanced Network Conditions
Under unbalanced grid condition, in a Doubly-Fed Induction Generator (DFIG), voltage, current, and flux of the stator become asymmetric. Therefore, active-reactive power and torque will be oscillating. In DFIG controlling Rotor Side Converter (RSC) aims to eliminate power and torque oscillations. However, simultaneous elimination of the power and torque oscillations is not possible. Also, Grid Side Converter (GSC) aims to regulate DC-Link voltage. In this paper, in order to regulate DC-Link voltage, an Extended State Observer (ESO) based on a Generalized Proportional-Integral (GPI) controller, is employed. In this controlling method, DC-Link voltage is controlled without measuring the GSC current, and due to using the GPI controller, the improved dynamic response is resistant against voltage changes, and the settling time is reduced. To improve the transient stability and Low Voltage Fault Ride Through (LVRT) capability of DFIG, Statistic Fault Current Limiter (S-FCL) and Magnetic Energy Storage Fault Current Limiter (MES-FCL) are proposed in this paper. The proposed FCL does not only limit the fault current but also fasten voltage recovery. The simulations are implemented by MATLAB software in the synchronous positive and negative sequence reference (d-q).
期刊介绍:
The scope of Majlesi Journal of Electrcial Engineering (MJEE) is ranging from mathematical foundation to practical engineering design in all areas of electrical engineering. The editorial board is international and original unpublished papers are welcome from throughout the world. The journal is devoted primarily to research papers, but very high quality survey and tutorial papers are also published. There is no publication charge for the authors.