(Al, Zn, Cu, Sr)掺杂对喷涂SnO2薄膜结构、光学和电学性能的影响

IF 1.1 Q3 METALLURGY & METALLURGICAL ENGINEERING
Imene Saoula, Chahinez Siad, Khedidja Djedidi, N. Allag, A. Chala
{"title":"(Al, Zn, Cu, Sr)掺杂对喷涂SnO2薄膜结构、光学和电学性能的影响","authors":"Imene Saoula, Chahinez Siad, Khedidja Djedidi, N. Allag, A. Chala","doi":"10.36547/ams.29.2.1730","DOIUrl":null,"url":null,"abstract":"Tin dioxide thin films deposited onto a glass substrate were prepared by spray pyrolysis technique, and then doped with different elements which are: Al, Zn, Cu, and Sr by electroplating method, these elements were chosen for their different atomic radii. XRD illustrate that all the films were polycrystalline with a tetragonal rutile structure and a strong preferred orientation of (200) plane. Uv-vis spectrophotometer specters showed that the highest average transmittance of Al/SnO2 film was about 86.77% in the visible region and the Sr/SnO2 film had the highest band gap of 3.95 eV. From the MEB images, the morphological characteristics improved when the SnO2 thin films doped with Al and Zn but the opposite happened when it doped with Cu and Sr. The four-point probe showed that the best sample was for Al/SnO2 because it had the highest electrical conductivity around 692.306 (Ω.cm) -1.","PeriodicalId":44511,"journal":{"name":"Acta Metallurgica Slovaca","volume":null,"pages":null},"PeriodicalIF":1.1000,"publicationDate":"2023-06-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effect of (Al, Zn, Cu, and Sr) doping on structural, optical and electrical properties of sprayed SnO2 thin films\",\"authors\":\"Imene Saoula, Chahinez Siad, Khedidja Djedidi, N. Allag, A. Chala\",\"doi\":\"10.36547/ams.29.2.1730\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Tin dioxide thin films deposited onto a glass substrate were prepared by spray pyrolysis technique, and then doped with different elements which are: Al, Zn, Cu, and Sr by electroplating method, these elements were chosen for their different atomic radii. XRD illustrate that all the films were polycrystalline with a tetragonal rutile structure and a strong preferred orientation of (200) plane. Uv-vis spectrophotometer specters showed that the highest average transmittance of Al/SnO2 film was about 86.77% in the visible region and the Sr/SnO2 film had the highest band gap of 3.95 eV. From the MEB images, the morphological characteristics improved when the SnO2 thin films doped with Al and Zn but the opposite happened when it doped with Cu and Sr. The four-point probe showed that the best sample was for Al/SnO2 because it had the highest electrical conductivity around 692.306 (Ω.cm) -1.\",\"PeriodicalId\":44511,\"journal\":{\"name\":\"Acta Metallurgica Slovaca\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.1000,\"publicationDate\":\"2023-06-20\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Acta Metallurgica Slovaca\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.36547/ams.29.2.1730\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"METALLURGY & METALLURGICAL ENGINEERING\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Acta Metallurgica Slovaca","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.36547/ams.29.2.1730","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}
引用次数: 0

摘要

采用喷雾热解技术在玻璃基板上制备了二氧化锡薄膜,并根据不同的原子半径选择不同的Al、Zn、Cu和Sr元素进行电镀。XRD分析结果表明,所有薄膜均为多晶,具有四边形金红石结构,具有较强的(200)面择优取向。紫外-可见分光光度计光谱显示,Al/SnO2薄膜在可见光区的平均透过率最高,约为86.77%,Sr/SnO2薄膜的带隙最高,为3.95 eV。从MEB图像来看,掺杂Al和Zn的SnO2薄膜的形貌特征得到改善,而掺杂Cu和sr的SnO2薄膜的形貌特征则相反。四点式探针表明,Al/SnO2薄膜的电导率最高,约为692.306 (Ω.cm) -1。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Effect of (Al, Zn, Cu, and Sr) doping on structural, optical and electrical properties of sprayed SnO2 thin films
Tin dioxide thin films deposited onto a glass substrate were prepared by spray pyrolysis technique, and then doped with different elements which are: Al, Zn, Cu, and Sr by electroplating method, these elements were chosen for their different atomic radii. XRD illustrate that all the films were polycrystalline with a tetragonal rutile structure and a strong preferred orientation of (200) plane. Uv-vis spectrophotometer specters showed that the highest average transmittance of Al/SnO2 film was about 86.77% in the visible region and the Sr/SnO2 film had the highest band gap of 3.95 eV. From the MEB images, the morphological characteristics improved when the SnO2 thin films doped with Al and Zn but the opposite happened when it doped with Cu and Sr. The four-point probe showed that the best sample was for Al/SnO2 because it had the highest electrical conductivity around 692.306 (Ω.cm) -1.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Acta Metallurgica Slovaca
Acta Metallurgica Slovaca METALLURGY & METALLURGICAL ENGINEERING-
CiteScore
2.00
自引率
30.00%
发文量
22
审稿时长
12 weeks
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信