AZ31镁合金双极脉冲模式等离子体电解氧化及其腐蚀对镀层表面形貌的影响

IF 0.8 4区 材料科学 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY
R. Drunka, I. Blumbergs, P. Iesalniece, K. Savkovs, I. Šteins
{"title":"AZ31镁合金双极脉冲模式等离子体电解氧化及其腐蚀对镀层表面形貌的影响","authors":"R. Drunka, I. Blumbergs, P. Iesalniece, K. Savkovs, I. Šteins","doi":"10.5755/j02.ms.32182","DOIUrl":null,"url":null,"abstract":"PEO method was used with AZ31 Mg alloy plates for improving corrosion resistance of the alloy. Process parameters for the PEO setup were optimized by studying the effects of KOH concentration, operating voltage, and pulse properties on the obtained coating. These conditions were then used to produce PEO coated AZ31 specimen and were tested by immersion in 3% NaCl solution for 1 week. Three types of modifiers were used in the electrolyte and concentrations of the modifiers were varied to study the effect of concentration on the performance of coating obtained. Extent of corrosion was visually examined, and it was found that an electrolyte recipe with all three modifiers produced the best results. \n ","PeriodicalId":18298,"journal":{"name":"Materials Science-medziagotyra","volume":null,"pages":null},"PeriodicalIF":0.8000,"publicationDate":"2023-08-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Plasma electrolytic oxidation of AZ31 Mg alloy in bipolar pulse mode and influence of corrosion to surface morphology of obtained coatings\",\"authors\":\"R. Drunka, I. Blumbergs, P. Iesalniece, K. Savkovs, I. Šteins\",\"doi\":\"10.5755/j02.ms.32182\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"PEO method was used with AZ31 Mg alloy plates for improving corrosion resistance of the alloy. Process parameters for the PEO setup were optimized by studying the effects of KOH concentration, operating voltage, and pulse properties on the obtained coating. These conditions were then used to produce PEO coated AZ31 specimen and were tested by immersion in 3% NaCl solution for 1 week. Three types of modifiers were used in the electrolyte and concentrations of the modifiers were varied to study the effect of concentration on the performance of coating obtained. Extent of corrosion was visually examined, and it was found that an electrolyte recipe with all three modifiers produced the best results. \\n \",\"PeriodicalId\":18298,\"journal\":{\"name\":\"Materials Science-medziagotyra\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.8000,\"publicationDate\":\"2023-08-16\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Materials Science-medziagotyra\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.5755/j02.ms.32182\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Materials Science-medziagotyra","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.5755/j02.ms.32182","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 1

摘要

采用PEO法制备AZ31镁合金板材,提高AZ31镁合金的耐蚀性。通过研究KOH浓度、工作电压和脉冲性能对镀层的影响,优化了PEO制备工艺参数。然后利用这些条件制备PEO涂层AZ31试样,并在3% NaCl溶液中浸泡1周。在电解液中加入了三种改性剂,并对其浓度进行了变化,研究了改性剂浓度对镀层性能的影响。目测了腐蚀程度,发现含有三种改性剂的电解质配方效果最好。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Plasma electrolytic oxidation of AZ31 Mg alloy in bipolar pulse mode and influence of corrosion to surface morphology of obtained coatings
PEO method was used with AZ31 Mg alloy plates for improving corrosion resistance of the alloy. Process parameters for the PEO setup were optimized by studying the effects of KOH concentration, operating voltage, and pulse properties on the obtained coating. These conditions were then used to produce PEO coated AZ31 specimen and were tested by immersion in 3% NaCl solution for 1 week. Three types of modifiers were used in the electrolyte and concentrations of the modifiers were varied to study the effect of concentration on the performance of coating obtained. Extent of corrosion was visually examined, and it was found that an electrolyte recipe with all three modifiers produced the best results.  
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Materials Science-medziagotyra
Materials Science-medziagotyra 工程技术-材料科学:综合
CiteScore
1.70
自引率
10.00%
发文量
92
审稿时长
6-12 weeks
期刊介绍: It covers the fields of materials science concerning with the traditional engineering materials as well as advanced materials and technologies aiming at the implementation and industry applications. The variety of materials under consideration, contributes to the cooperation of scientists working in applied physics, chemistry, materials science and different fields of engineering.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信