干燥条件对真空热处理后落叶松板强度性能的影响

IF 2.7 3区 工程技术 Q3 ENGINEERING, CHEMICAL
C. Lee, Seungju Oh
{"title":"干燥条件对真空热处理后落叶松板强度性能的影响","authors":"C. Lee, Seungju Oh","doi":"10.1080/07373937.2023.2241899","DOIUrl":null,"url":null,"abstract":"Abstract This study aimed to investigate the effect of drying conditions on the strength properties of larch boards after vacuum heat treatment, using leftover boards from a previous study that were dried by four methods: conventional kiln drying, high-temperature drying, radio-frequency/vacuum-press (RF/VP) drying, and hot-air/vacuum drying. The boards were then heat-treated and tested for moisture content, density, bending strength, compressive strength, and tensile strength. The results showed that the drying method significantly affected the strength properties of the larch boards after vacuum heat treatment. After vacuum heat treatment, density increased in hot-air/vacuum drying and RF/VP drying, while bending strength was higher in high-temperature drying and hot-air/vacuum drying, and tensile strength was higher in hot-air/vacuum drying. Conditioning treatment after vacuum heat treatment had an impact on the decrease in density in RF/VP drying, the decrease in bending strength in hot-air/vacuum drying, and the increase in tensile strength in high-temperature drying. The drying method is a crucial factor in determining the chemical changes that occur during heat treatment, as it establishes the physical and chemical properties of the wood prior to treatment. Variations in these properties can result in different chemical transformations during the heat treatment process. Therefore, to minimize any adverse impact on the strength properties of the wood, it is necessary to carefully select an appropriate drying method before heat treatment.","PeriodicalId":11374,"journal":{"name":"Drying Technology","volume":null,"pages":null},"PeriodicalIF":2.7000,"publicationDate":"2023-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effect of the drying condition on the strength properties of Japanese larch board after vacuum heat treatment\",\"authors\":\"C. Lee, Seungju Oh\",\"doi\":\"10.1080/07373937.2023.2241899\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Abstract This study aimed to investigate the effect of drying conditions on the strength properties of larch boards after vacuum heat treatment, using leftover boards from a previous study that were dried by four methods: conventional kiln drying, high-temperature drying, radio-frequency/vacuum-press (RF/VP) drying, and hot-air/vacuum drying. The boards were then heat-treated and tested for moisture content, density, bending strength, compressive strength, and tensile strength. The results showed that the drying method significantly affected the strength properties of the larch boards after vacuum heat treatment. After vacuum heat treatment, density increased in hot-air/vacuum drying and RF/VP drying, while bending strength was higher in high-temperature drying and hot-air/vacuum drying, and tensile strength was higher in hot-air/vacuum drying. Conditioning treatment after vacuum heat treatment had an impact on the decrease in density in RF/VP drying, the decrease in bending strength in hot-air/vacuum drying, and the increase in tensile strength in high-temperature drying. The drying method is a crucial factor in determining the chemical changes that occur during heat treatment, as it establishes the physical and chemical properties of the wood prior to treatment. Variations in these properties can result in different chemical transformations during the heat treatment process. Therefore, to minimize any adverse impact on the strength properties of the wood, it is necessary to carefully select an appropriate drying method before heat treatment.\",\"PeriodicalId\":11374,\"journal\":{\"name\":\"Drying Technology\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":2.7000,\"publicationDate\":\"2023-08-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Drying Technology\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1080/07373937.2023.2241899\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENGINEERING, CHEMICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Drying Technology","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1080/07373937.2023.2241899","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
引用次数: 0

摘要

本文章由计算机程序翻译,如有差异,请以英文原文为准。
Effect of the drying condition on the strength properties of Japanese larch board after vacuum heat treatment
Abstract This study aimed to investigate the effect of drying conditions on the strength properties of larch boards after vacuum heat treatment, using leftover boards from a previous study that were dried by four methods: conventional kiln drying, high-temperature drying, radio-frequency/vacuum-press (RF/VP) drying, and hot-air/vacuum drying. The boards were then heat-treated and tested for moisture content, density, bending strength, compressive strength, and tensile strength. The results showed that the drying method significantly affected the strength properties of the larch boards after vacuum heat treatment. After vacuum heat treatment, density increased in hot-air/vacuum drying and RF/VP drying, while bending strength was higher in high-temperature drying and hot-air/vacuum drying, and tensile strength was higher in hot-air/vacuum drying. Conditioning treatment after vacuum heat treatment had an impact on the decrease in density in RF/VP drying, the decrease in bending strength in hot-air/vacuum drying, and the increase in tensile strength in high-temperature drying. The drying method is a crucial factor in determining the chemical changes that occur during heat treatment, as it establishes the physical and chemical properties of the wood prior to treatment. Variations in these properties can result in different chemical transformations during the heat treatment process. Therefore, to minimize any adverse impact on the strength properties of the wood, it is necessary to carefully select an appropriate drying method before heat treatment.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Drying Technology
Drying Technology 工程技术-工程:化工
CiteScore
7.40
自引率
15.20%
发文量
133
审稿时长
2 months
期刊介绍: Drying Technology explores the science and technology, and the engineering aspects of drying, dewatering, and related topics. Articles in this multi-disciplinary journal cover the following themes: -Fundamental and applied aspects of dryers in diverse industrial sectors- Mathematical modeling of drying and dryers- Computer modeling of transport processes in multi-phase systems- Material science aspects of drying- Transport phenomena in porous media- Design, scale-up, control and off-design analysis of dryers- Energy, environmental, safety and techno-economic aspects- Quality parameters in drying operations- Pre- and post-drying operations- Novel drying technologies. This peer-reviewed journal provides an archival reference for scientists, engineers, and technologists in all industrial sectors and academia concerned with any aspect of thermal or nonthermal dehydration and allied operations.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信