Investigation of differential shrinkage stresses in a revolution shell structure due to the evolving parameters of concrete

Abstract The article focuses on the influence of differential shrinkage linked by drying at the early-age displacements and strain distribution of a concrete ring specimen. Depending on the gradient of dimension changes through the thickness, tensile stress occurs near the exposed surface where drying is greater and thus results in strain gradients development. An experimental design was carried out on a concrete ring cast in laboratory conditions in order to monitor strains and displacements. Subsequently, a finite element method was used to simulate the ring’s behaviour in drying conditions. The gradient development linked by a non-uniform moisture distribution in the thickness is established by solving the non-linear partial differential drying equation with Mensi’s diffusion law. The stress and displacement analysis was modeled by three nodes curved shell FEM (CSFE-sh) based on strain approximation with the shell theory. Finally, the ring’s behaviour includes both differential shrinkage resulting in the mechanical and physical properties of gradients development in the thickness and the influence of prestressing, in which the tensile creep effects have a great influence. The comparison of experimental results with numerical simulation shows that drying and tensile creep phenomena have the most important influence on the early-age stress development in the walled ring.