Yu. D. Syromyatnikov, Irina Troyanovskaya, R. Zagidullin, E. Tikhonov, Alexandra Orekhovskaya, S. Voinash
{"title":"传统板耕作的土壤密度","authors":"Yu. D. Syromyatnikov, Irina Troyanovskaya, R. Zagidullin, E. Tikhonov, Alexandra Orekhovskaya, S. Voinash","doi":"10.2478/ata-2023-0021","DOIUrl":null,"url":null,"abstract":"Abstract Until recently, mouldboard ploughing was used as the main tillage in almost the entire territory of Ukraine and Russia. However, mouldboard technologies contribute to the formation of a “plough pan”, which contributes to additional soil compaction. The intensity of agricultural production exacerbated the problem of soil compaction by machine and tractor units. The over-consolidation of soil results in stunted plant root growth, lack of oxygen, and water and nutrient restrictions. Soil compaction can be reduced by deep local chiselling. The aim of the study was to determine the density of the soil at different depths during continuous traditional cultivation (reverse ploughing). The density of the soil was evaluated by resistance to penetration into the soil in a vegetable-forage crop rotation on an experimental field with continuous traditional tillage. The measurement of penetration resistance was carried out using an automatic electronic hardness tester “DATAFIELD”. The boundaries of the experimental field were determined, a computer map of the experimental field was compiled with automatic “grid” of plot sizes, two-dimensional mapping was carried out, and the sequence and place of measurements were developed. As a result, the level of soil compaction at different penetration depths and resistance to root growth was determined. It has been established that with constant traditional reverse tillage, the soil at a depth of more than 10 cm is sufficiently compacted. At a depth of 15 cm, a strong compaction of the soil is observed, which indicates its physical and hydrological degradation.","PeriodicalId":43089,"journal":{"name":"Acta Technologica Agriculturae","volume":null,"pages":null},"PeriodicalIF":1.3000,"publicationDate":"2023-08-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Soil Density in Traditional Mouldboard Tillage\",\"authors\":\"Yu. D. Syromyatnikov, Irina Troyanovskaya, R. Zagidullin, E. Tikhonov, Alexandra Orekhovskaya, S. Voinash\",\"doi\":\"10.2478/ata-2023-0021\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Abstract Until recently, mouldboard ploughing was used as the main tillage in almost the entire territory of Ukraine and Russia. However, mouldboard technologies contribute to the formation of a “plough pan”, which contributes to additional soil compaction. The intensity of agricultural production exacerbated the problem of soil compaction by machine and tractor units. The over-consolidation of soil results in stunted plant root growth, lack of oxygen, and water and nutrient restrictions. Soil compaction can be reduced by deep local chiselling. The aim of the study was to determine the density of the soil at different depths during continuous traditional cultivation (reverse ploughing). The density of the soil was evaluated by resistance to penetration into the soil in a vegetable-forage crop rotation on an experimental field with continuous traditional tillage. The measurement of penetration resistance was carried out using an automatic electronic hardness tester “DATAFIELD”. The boundaries of the experimental field were determined, a computer map of the experimental field was compiled with automatic “grid” of plot sizes, two-dimensional mapping was carried out, and the sequence and place of measurements were developed. As a result, the level of soil compaction at different penetration depths and resistance to root growth was determined. It has been established that with constant traditional reverse tillage, the soil at a depth of more than 10 cm is sufficiently compacted. At a depth of 15 cm, a strong compaction of the soil is observed, which indicates its physical and hydrological degradation.\",\"PeriodicalId\":43089,\"journal\":{\"name\":\"Acta Technologica Agriculturae\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.3000,\"publicationDate\":\"2023-08-18\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Acta Technologica Agriculturae\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.2478/ata-2023-0021\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"AGRICULTURE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Acta Technologica Agriculturae","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.2478/ata-2023-0021","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"AGRICULTURE, MULTIDISCIPLINARY","Score":null,"Total":0}
Abstract Until recently, mouldboard ploughing was used as the main tillage in almost the entire territory of Ukraine and Russia. However, mouldboard technologies contribute to the formation of a “plough pan”, which contributes to additional soil compaction. The intensity of agricultural production exacerbated the problem of soil compaction by machine and tractor units. The over-consolidation of soil results in stunted plant root growth, lack of oxygen, and water and nutrient restrictions. Soil compaction can be reduced by deep local chiselling. The aim of the study was to determine the density of the soil at different depths during continuous traditional cultivation (reverse ploughing). The density of the soil was evaluated by resistance to penetration into the soil in a vegetable-forage crop rotation on an experimental field with continuous traditional tillage. The measurement of penetration resistance was carried out using an automatic electronic hardness tester “DATAFIELD”. The boundaries of the experimental field were determined, a computer map of the experimental field was compiled with automatic “grid” of plot sizes, two-dimensional mapping was carried out, and the sequence and place of measurements were developed. As a result, the level of soil compaction at different penetration depths and resistance to root growth was determined. It has been established that with constant traditional reverse tillage, the soil at a depth of more than 10 cm is sufficiently compacted. At a depth of 15 cm, a strong compaction of the soil is observed, which indicates its physical and hydrological degradation.
期刊介绍:
Acta Technologica Agriculturae is an international scientific double-blind peer reviewed journal focused on agricultural engineering. The journal is multidisciplinary and publishes original research and review papers in engineering, agricultural and biological sciences, and materials science. Aims and Scope Areas of interest include but are not limited to: agricultural and biosystems engineering; machines and mechanization of agricultural production; information and electrical technologies; agro-product and food processing engineering; physical, chemical and biological changes in the soil caused by tillage and field traffic, soil working machinery and terramechanics; renewable energy sources and bioenergy; rural buildings; related issues from applied physics and chemistry, ecology, economy and energy.