抗腐蚀聚合物和复合涂层的脱拉强度和耐磨性

IF 1 4区工程技术 Q4 ENGINEERING, MECHANICAL

International Journal of Surface Science and Engineering Pub Date : 2019-02-25 DOI:10.1504/IJSURFSE.2019.10019184

A. Dmitruk, P. Mayer, J. Pach

{"title":"抗腐蚀聚合物和复合涂层的脱拉强度和耐磨性","authors":"A. Dmitruk, P. Mayer, J. Pach","doi":"10.1504/IJSURFSE.2019.10019184","DOIUrl":null,"url":null,"abstract":"The paper aims at presenting the results of pull-off strength and abrasion resistance tests for anti-corrosive coatings on steel substrates. It contains the measured data on the thickness of manufactured coatings in the function of the applied amount of abrasive material. Three polymeric coatings were subjected for testing: chlorinated rubber, oil-phthalic and alkyd. The analogous studies were repeated for composite coatings with alumina α-Al2O3 filler and subsequently also for the aged (72 h, -19°C) systems. For the pull-off tests, the damage analysis of samples after failure was performed. The highest pull-off strength's values for the produced coatings were obtained for the alkyd one. Concerning the abrasion resistance it can be stated that, the addition of a filler significantly improves the system's durability, while the aging process causes its deterioration.","PeriodicalId":14460,"journal":{"name":"International Journal of Surface Science and Engineering","volume":" ","pages":""},"PeriodicalIF":1.0000,"publicationDate":"2019-02-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"Pull-off strength and abrasion resistance of anti-corrosive polymer and composite coatings\",\"authors\":\"A. Dmitruk, P. Mayer, J. Pach\",\"doi\":\"10.1504/IJSURFSE.2019.10019184\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The paper aims at presenting the results of pull-off strength and abrasion resistance tests for anti-corrosive coatings on steel substrates. It contains the measured data on the thickness of manufactured coatings in the function of the applied amount of abrasive material. Three polymeric coatings were subjected for testing: chlorinated rubber, oil-phthalic and alkyd. The analogous studies were repeated for composite coatings with alumina α-Al2O3 filler and subsequently also for the aged (72 h, -19°C) systems. For the pull-off tests, the damage analysis of samples after failure was performed. The highest pull-off strength's values for the produced coatings were obtained for the alkyd one. Concerning the abrasion resistance it can be stated that, the addition of a filler significantly improves the system's durability, while the aging process causes its deterioration.\",\"PeriodicalId\":14460,\"journal\":{\"name\":\"International Journal of Surface Science and Engineering\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":1.0000,\"publicationDate\":\"2019-02-25\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Surface Science and Engineering\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1504/IJSURFSE.2019.10019184\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"ENGINEERING, MECHANICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Surface Science and Engineering","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1504/IJSURFSE.2019.10019184","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}

引用次数: 2

摘要

本文旨在介绍钢基体防腐涂层的剥离强度和耐磨性试验结果。它包含了以磨料用量为函数的制造涂层厚度的测量数据。测试了三种聚合物涂层：氯化橡胶、油邻苯二甲酸和醇酸。对含有氧化铝α-Al2O3填料的复合涂层以及随后的老化（72小时，-19°C）系统重复了类似的研究。对于拉拔试验，进行了失效后样品的损伤分析。醇酸树脂涂层的剥离强度最高。关于耐磨性，可以说，添加填料显著提高了系统的耐久性，而老化过程会导致其劣化。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Pull-off strength and abrasion resistance of anti-corrosive polymer and composite coatings

The paper aims at presenting the results of pull-off strength and abrasion resistance tests for anti-corrosive coatings on steel substrates. It contains the measured data on the thickness of manufactured coatings in the function of the applied amount of abrasive material. Three polymeric coatings were subjected for testing: chlorinated rubber, oil-phthalic and alkyd. The analogous studies were repeated for composite coatings with alumina α-Al2O3 filler and subsequently also for the aged (72 h, -19°C) systems. For the pull-off tests, the damage analysis of samples after failure was performed. The highest pull-off strength's values for the produced coatings were obtained for the alkyd one. Concerning the abrasion resistance it can be stated that, the addition of a filler significantly improves the system's durability, while the aging process causes its deterioration.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

International Journal of Surface Science and Engineering 工程技术-材料科学：膜

CiteScore

1.60

自引率

25.00%

发文量

审稿时长

>12 weeks

期刊介绍： IJSurfSE publishes refereed quality papers in the broad field of surface science and engineering including tribology, but with a special emphasis on the research and development in friction, wear, coatings and surface modification processes such as surface treatment, cladding, machining, polishing and grinding, across multiple scales from nanoscopic to macroscopic dimensions. High-integrity and high-performance surfaces of components have become a central research area in the professional community whose aim is to develop highly reliable ultra-precision devices.