Pati Jagung Face生物塑料的加热和干燥时间容器生物降解时间

Eksergi Pub Date : 2023-07-03 DOI:10.31315/e.v20i2.9727
Mirra Amanda Syamsyyah, Myra Wardati Sari, Cengristitama Cengristitama, Lulu Nurdini
{"title":"Pati Jagung Face生物塑料的加热和干燥时间容器生物降解时间","authors":"Mirra Amanda Syamsyyah, Myra Wardati Sari, Cengristitama Cengristitama, Lulu Nurdini","doi":"10.31315/e.v20i2.9727","DOIUrl":null,"url":null,"abstract":"The disposal plastic waste into the environtment is an important issue due to the natureof the origin of plastics that are difficult to decomposes naturally. Therefore, efforts are made to accelerate the degradation time by using natural polymers. Corn is one of the easily found sources of starch. Starch is one of the natural polymres that can be used for the manufacture of biodegradable plastics (bioplastics) because it is easily degradable, readily available and affordable but has shortcomings in mechanical properties and water absorption ability.The purpose of this study was to observe the effect of temperature variations 60; 70; 80 and 90°C with a drying time of 1; 2; 3 and 4 hours of biodegradation time. From this study, the best results were found at a temperature of 60°C with a drying time of 1 hour which obtained a degradation time of 5 days; average thickness 0.12 mm – 0.30 mm; the overall average water absorption is 4.04% and the average water resistance is 95.99%; tensile strength of 5.69 MPa and 5.54 MPa; elongation at break of 4% and 1.6%.","PeriodicalId":30703,"journal":{"name":"Eksergi","volume":" ","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2023-07-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Pengaruh Suhu dan Waktu Pengeringan Pada Bioplastik dari Pati Jagung Terhadap Waktu Biodegradasi\",\"authors\":\"Mirra Amanda Syamsyyah, Myra Wardati Sari, Cengristitama Cengristitama, Lulu Nurdini\",\"doi\":\"10.31315/e.v20i2.9727\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The disposal plastic waste into the environtment is an important issue due to the natureof the origin of plastics that are difficult to decomposes naturally. Therefore, efforts are made to accelerate the degradation time by using natural polymers. Corn is one of the easily found sources of starch. Starch is one of the natural polymres that can be used for the manufacture of biodegradable plastics (bioplastics) because it is easily degradable, readily available and affordable but has shortcomings in mechanical properties and water absorption ability.The purpose of this study was to observe the effect of temperature variations 60; 70; 80 and 90°C with a drying time of 1; 2; 3 and 4 hours of biodegradation time. From this study, the best results were found at a temperature of 60°C with a drying time of 1 hour which obtained a degradation time of 5 days; average thickness 0.12 mm – 0.30 mm; the overall average water absorption is 4.04% and the average water resistance is 95.99%; tensile strength of 5.69 MPa and 5.54 MPa; elongation at break of 4% and 1.6%.\",\"PeriodicalId\":30703,\"journal\":{\"name\":\"Eksergi\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2023-07-03\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Eksergi\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.31315/e.v20i2.9727\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Eksergi","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.31315/e.v20i2.9727","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

由于塑料的来源很难自然分解,将塑料垃圾处理到环境中是一个重要问题。因此,人们努力通过使用天然聚合物来加快降解时间。玉米是容易找到的淀粉来源之一。淀粉是可用于制造可生物降解塑料(生物塑料)的天然多聚物之一,因为它易于降解、易于获得且价格合理,但在机械性能和吸水能力方面存在缺陷。本研究的目的是观察温度变化的影响60;70;80和90°C,干燥时间为1;2.3和4小时的生物降解时间。根据这项研究,在60°C的温度下,干燥时间为1小时,降解时间为5天,结果最好;平均厚度0.12 mm–0.30 mm;总平均吸水率为4.04%,平均耐水性为95.99%;抗拉强度分别为5.69MPa和5.54MPa;断裂伸长率分别为4%和1.6%。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Pengaruh Suhu dan Waktu Pengeringan Pada Bioplastik dari Pati Jagung Terhadap Waktu Biodegradasi
The disposal plastic waste into the environtment is an important issue due to the natureof the origin of plastics that are difficult to decomposes naturally. Therefore, efforts are made to accelerate the degradation time by using natural polymers. Corn is one of the easily found sources of starch. Starch is one of the natural polymres that can be used for the manufacture of biodegradable plastics (bioplastics) because it is easily degradable, readily available and affordable but has shortcomings in mechanical properties and water absorption ability.The purpose of this study was to observe the effect of temperature variations 60; 70; 80 and 90°C with a drying time of 1; 2; 3 and 4 hours of biodegradation time. From this study, the best results were found at a temperature of 60°C with a drying time of 1 hour which obtained a degradation time of 5 days; average thickness 0.12 mm – 0.30 mm; the overall average water absorption is 4.04% and the average water resistance is 95.99%; tensile strength of 5.69 MPa and 5.54 MPa; elongation at break of 4% and 1.6%.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
审稿时长
4 weeks
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信