利用集中能量流技术形成涂层

IF 1.9 Q3 ENGINEERING, INDUSTRIAL

Production Engineering Archives Pub Date : 2022-05-19 DOI:10.30657/pea.2022.28.13

N. Radek, A. Kalinowski, J. Pietraszek, Ł. Orman, M. Szczepaniak, A. Januszko, J. Kamiński, J. Bronček, O. Paraska

{"title":"利用集中能量流技术形成涂层","authors":"N. Radek, A. Kalinowski, J. Pietraszek, Ł. Orman, M. Szczepaniak, A. Januszko, J. Kamiński, J. Bronček, O. Paraska","doi":"10.30657/pea.2022.28.13","DOIUrl":null,"url":null,"abstract":"Abstract A number of modern surface processing methods use an energy flux. The examples include electro-spark deposition (ESD) and laser beam processing (LBP). The work concerns the study of Cu-Mo coatings deposited on C45 carbon steel, which were then eroded with a laser beam. The analysis included the analysis of the microstructure, measurements of macrogeometry and microhardness, corrosion resistance tests of selected areas after laser treatment. The coatings were applied with ELFA-541 and subjected to Nd:YAG laser treatment with variable laser parameters. The problem presented in the work can be used to extend the knowledge of the areas of application of ESD coatings, especially in sliding friction pairs.","PeriodicalId":36269,"journal":{"name":"Production Engineering Archives","volume":null,"pages":null},"PeriodicalIF":1.9000,"publicationDate":"2022-05-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"6","resultStr":"{\"title\":\"Formation of coatings with technologies using concentrated energy stream\",\"authors\":\"N. Radek, A. Kalinowski, J. Pietraszek, Ł. Orman, M. Szczepaniak, A. Januszko, J. Kamiński, J. Bronček, O. Paraska\",\"doi\":\"10.30657/pea.2022.28.13\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Abstract A number of modern surface processing methods use an energy flux. The examples include electro-spark deposition (ESD) and laser beam processing (LBP). The work concerns the study of Cu-Mo coatings deposited on C45 carbon steel, which were then eroded with a laser beam. The analysis included the analysis of the microstructure, measurements of macrogeometry and microhardness, corrosion resistance tests of selected areas after laser treatment. The coatings were applied with ELFA-541 and subjected to Nd:YAG laser treatment with variable laser parameters. The problem presented in the work can be used to extend the knowledge of the areas of application of ESD coatings, especially in sliding friction pairs.\",\"PeriodicalId\":36269,\"journal\":{\"name\":\"Production Engineering Archives\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.9000,\"publicationDate\":\"2022-05-19\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"6\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Production Engineering Archives\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.30657/pea.2022.28.13\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENGINEERING, INDUSTRIAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Production Engineering Archives","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.30657/pea.2022.28.13","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, INDUSTRIAL","Score":null,"Total":0}

引用次数: 6

摘要

摘要许多现代表面处理方法都使用能量通量。示例包括电火花沉积（ESD）和激光束处理（LBP）。这项工作涉及在C45碳钢上沉积Cu-Mo涂层的研究，然后用激光束对其进行侵蚀。分析包括微观结构分析、宏观几何形状和显微硬度测量、激光处理后选定区域的耐腐蚀性测试。用ELFA-541涂覆涂层，并用可变激光参数对其进行Nd:YAG激光处理。该工作中提出的问题可用于扩展ESD涂层应用领域的知识，特别是在滑动摩擦副中。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Formation of coatings with technologies using concentrated energy stream

Abstract A number of modern surface processing methods use an energy flux. The examples include electro-spark deposition (ESD) and laser beam processing (LBP). The work concerns the study of Cu-Mo coatings deposited on C45 carbon steel, which were then eroded with a laser beam. The analysis included the analysis of the microstructure, measurements of macrogeometry and microhardness, corrosion resistance tests of selected areas after laser treatment. The coatings were applied with ELFA-541 and subjected to Nd:YAG laser treatment with variable laser parameters. The problem presented in the work can be used to extend the knowledge of the areas of application of ESD coatings, especially in sliding friction pairs.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Production Engineering Archives Engineering-Industrial and Manufacturing Engineering

CiteScore

6.10

自引率

13.00%

发文量

审稿时长

6 weeks