Reducing total annual cost and CO2 emissions in batch distillation for separating ternary wide boiling mixtures using vapor recompression heat pump

Abstract This paper presents cost-effective heat pump assisted vapor recompression (VRC) design algorithms for the separation of ternary wide boiling mixture in batch distillation in order to reduce total annual cost (TAC) and carbon dioxide (CO2) emissions. A minimum TAC and CO2 is required by the batch distillation process industry for any investments in heat integrated systems, such as VRC. Consequently, the design conditions for implementing VRC should be chosen such that the energetic performance is maximum at minimum TAC. The model system selected in this paper is an application involving high temperature lift, that is, hexanol–octanol–decanol ternary wide boiling mixture. First, a systematic simulation algorithm was developed for conventional multicomponent batch distillation (CMBD) and single-stage vapor recompressed multicomponent batch distillation (SiVRMBD) to determine the optimal number of stages based on the maximum TAC savings. The SiVRMBD saves more energy and TAC than CMBD. However, SiVRMBD has a high compression ratio (CR) throughout the operation, which is not practically feasible for the batch distillation processing. Second, in order to increase the performance and minimize the SiVRMBD weakness, a novel optimal multi-stage vapor recompression algorithm was proposed to operate at the lowest possible CR (<3.5) throughout the batch operation while also conserving the most TAC. Overall, the findings suggest that the proposed optimal multi-stage VRC reduces TAC and CO2 emissions significantly when compared to CMBD. Finally, the influence of the different feed compositions on VRC performance is also studied.