Standardization of Impulse Extinguishing Installations for Delivery of Self Foaming Gas-aerosol Foam

Pulse fire extinguishing was actively developing. There is a wide range of impulse fire extinguishing devices on the market. However, existing standards do not cover the entire class of these products. Hence there are problems with their certification. To date, two standards are approved and in force: GOST R 53291—2009 «Fire-fighting equipment. Mobile and portable fire extinguishing devices with high-speed delivery of fire extinguishing agent. General technical requirements. Test methods», and GOST R 53286—2009 «Fire-fighting equipment. Automatic powder fire-extinguishing installations. Modules. General technical requirements. Test methods». Two more standards are under development: one of them is essentially a slightly modified version of GOST R 53291—2009 — it will be given the status of interstate; the second supplements GOST R 53286—2009 and concerns installations and modules for gas-powder fire extinguishing. Impulse fire extinguishing installations with self-foaming gas-aerosol-filled foam are not subject to the listed standards for technical requirements and test methods. This applies primarily to the requirements for the volume of vessels used to obtain foam and displace it from there, as well as for the operating time of the pulse fire extinguishing installation, measuring the rate of exit of the fire extinguishing agent, calculating this rate according to the graph of pressure change in the vessel, etc. Therefore, for these installations a separate standard is required. In this case, in general, it is required to give clear definitions of what is meant by impulse fire extinguishing and impulse fire extinguishing installations.