超快速加热对aisi304奥氏体不锈钢的影响

IF 1.1 Q3 METALLURGY & METALLURGICAL ENGINEERING

Acta Metallurgica Slovaca Pub Date : 2023-06-20 DOI:10.36547/ams.29.2.1833

B. R. Rodriguez vargas, L. Albini, Giulia Tiracorrendo, Riccardo Massi, G. Stornelli, A. Di schino

{"title":"超快速加热对aisi304奥氏体不锈钢的影响","authors":"B. R. Rodriguez vargas, L. Albini, Giulia Tiracorrendo, Riccardo Massi, G. Stornelli, A. Di schino","doi":"10.36547/ams.29.2.1833","DOIUrl":null,"url":null,"abstract":"This study explores the effects of ultrafast heating on AISI 304 austenitic stainless steel. The research shows that ultrafast heating can lead to fine-grained mixed microstructures in steel, making it a potential alternative for modifying microstructure in stainless steel. The study demonstrates that a minimum temperature of 980 °C is required to achieve a fully recrystallized microstructure. The results also suggest that a lower temperature can result in a finer recrystallized grain size compared to higher temperature results. The study provides valuable insights into the impact of ultrafast heating on the microstructural constituents, recrystallization temperatures, and mechanical properties of investigated steel.","PeriodicalId":44511,"journal":{"name":"Acta Metallurgica Slovaca","volume":null,"pages":null},"PeriodicalIF":1.1000,"publicationDate":"2023-06-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"EFFECT OF ULTRAFAST HEATING ON AISI 304 AUSTENITIC STAINLESS STEEL\",\"authors\":\"B. R. Rodriguez vargas, L. Albini, Giulia Tiracorrendo, Riccardo Massi, G. Stornelli, A. Di schino\",\"doi\":\"10.36547/ams.29.2.1833\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This study explores the effects of ultrafast heating on AISI 304 austenitic stainless steel. The research shows that ultrafast heating can lead to fine-grained mixed microstructures in steel, making it a potential alternative for modifying microstructure in stainless steel. The study demonstrates that a minimum temperature of 980 °C is required to achieve a fully recrystallized microstructure. The results also suggest that a lower temperature can result in a finer recrystallized grain size compared to higher temperature results. The study provides valuable insights into the impact of ultrafast heating on the microstructural constituents, recrystallization temperatures, and mechanical properties of investigated steel.\",\"PeriodicalId\":44511,\"journal\":{\"name\":\"Acta Metallurgica Slovaca\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.1000,\"publicationDate\":\"2023-06-20\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Acta Metallurgica Slovaca\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.36547/ams.29.2.1833\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"METALLURGY & METALLURGICAL ENGINEERING\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Acta Metallurgica Slovaca","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.36547/ams.29.2.1833","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}

引用次数: 2

摘要

本研究探讨了超快速加热对AISI 304奥氏体不锈钢的影响。研究表明，超快加热可以在钢中产生细粒度的混合微观组织，使其成为改变不锈钢微观组织的潜在替代品。研究表明，实现完全再结晶的微观结构需要980°C的最低温度。结果还表明，与较高的温度结果相比，较低的温度可以导致更细的再结晶晶粒尺寸。该研究为超快加热对所研究钢的微观结构成分、再结晶温度和机械性能的影响提供了有价值的见解。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

EFFECT OF ULTRAFAST HEATING ON AISI 304 AUSTENITIC STAINLESS STEEL

This study explores the effects of ultrafast heating on AISI 304 austenitic stainless steel. The research shows that ultrafast heating can lead to fine-grained mixed microstructures in steel, making it a potential alternative for modifying microstructure in stainless steel. The study demonstrates that a minimum temperature of 980 °C is required to achieve a fully recrystallized microstructure. The results also suggest that a lower temperature can result in a finer recrystallized grain size compared to higher temperature results. The study provides valuable insights into the impact of ultrafast heating on the microstructural constituents, recrystallization temperatures, and mechanical properties of investigated steel.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Acta Metallurgica Slovaca METALLURGY & METALLURGICAL ENGINEERING-

CiteScore

2.00

自引率

30.00%

发文量

审稿时长

12 weeks