费托合成条件下纳米悬浮液制备方法对其物理化学和催化性能的影响

IF 0.6 Q4 CHEMISTRY, MULTIDISCIPLINARY
M. Kulikova, O. S. Dement’eva, M. Chudakova, M. Ivantsov
{"title":"费托合成条件下纳米悬浮液制备方法对其物理化学和催化性能的影响","authors":"M. Kulikova, O. S. Dement’eva, M. Chudakova, M. Ivantsov","doi":"10.6060/IVKKT20186109-10.5863A","DOIUrl":null,"url":null,"abstract":"Methods for the formation of stable iron-containing suspensions that exhibit activity in the conversion of synthesis gas to C5+ hydrocarbons by the Fischer-Tropsch method are proposed. By XRD and DLS methods it was determined that the formation of the Fe2O3 phase with a bimodal particle size distribution of 50 and 295 nm results in the formation of a suspension by the drop thermolysis method − the gradual introduction of the active metal precursor solution into the dispersion medium (mixture of hydrocarbons C19H40-C32H66). Pulsed introduction of the active metal precursor solution (flash-pyrolysis) into the reactor zone leads to the formation of the Fe3O4 phase with a particle size of 91 and 460 nm. By TEM and AFM methods it was established that, regardless of the slurry forming method, large active phase particles are agglomerates of a finer fraction of particles with an average size of 42 nm. The obtained suspensions demonstrated high activity in the Fischer-Tropsch synthesis under the slurry-reactor conditions, however, the degree of CO conversion is slightly higher in the case of the catalytic suspension prepared by the drop thermolysis method. It is shown that the method of forming the suspension significantly affects the fractional composition of the resulting reaction products. In the presence of a suspension obtained by drop thermolysis, the yield of liquid hydrocarbons reaches 130 g/m3, while a high content of C19+ hydrocarbons is observed. The system formed by the method of flash-pyrolysis makes it possible to obtain mainly the gasoline (C5-C10) and diesel (C11-C18) hydrocarbon fractions. It should be noted that the products of the reaction have a high content of unsaturated hydrocarbons, which reaches 55%. Thus, the composition of the final products of FTS can be controlled by the choice of the catalytic suspension prepared method. \nFor citation: \nKulikova M.V., Dement’eva O.S., Chudakova M.V., Ivantsov M.I. Influence of preparing nanoscale suspensions method on its physico-chemical and catalytic properties under the conditions of Fischer-Tropsch synthesis. Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol. 2018. V. 61. N 9-10. P. 70-75 \n ","PeriodicalId":45993,"journal":{"name":"Izvestiya Vysshikh Uchebnykh Zavedenii Khimiya i Khimicheskaya Tekhnologiya","volume":null,"pages":null},"PeriodicalIF":0.6000,"publicationDate":"2018-10-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"INFLUENCE OF PREPARING NANOSCALE SUSPENSIONS METHOD ON ITS PHYSICO-CHEMICAL AND CATALYTIC PROPERTIES UNDER THE CONDITIONS OF FISCHER-TROPSCH SYNTHESIS\",\"authors\":\"M. Kulikova, O. S. Dement’eva, M. Chudakova, M. Ivantsov\",\"doi\":\"10.6060/IVKKT20186109-10.5863A\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Methods for the formation of stable iron-containing suspensions that exhibit activity in the conversion of synthesis gas to C5+ hydrocarbons by the Fischer-Tropsch method are proposed. By XRD and DLS methods it was determined that the formation of the Fe2O3 phase with a bimodal particle size distribution of 50 and 295 nm results in the formation of a suspension by the drop thermolysis method − the gradual introduction of the active metal precursor solution into the dispersion medium (mixture of hydrocarbons C19H40-C32H66). Pulsed introduction of the active metal precursor solution (flash-pyrolysis) into the reactor zone leads to the formation of the Fe3O4 phase with a particle size of 91 and 460 nm. By TEM and AFM methods it was established that, regardless of the slurry forming method, large active phase particles are agglomerates of a finer fraction of particles with an average size of 42 nm. The obtained suspensions demonstrated high activity in the Fischer-Tropsch synthesis under the slurry-reactor conditions, however, the degree of CO conversion is slightly higher in the case of the catalytic suspension prepared by the drop thermolysis method. It is shown that the method of forming the suspension significantly affects the fractional composition of the resulting reaction products. In the presence of a suspension obtained by drop thermolysis, the yield of liquid hydrocarbons reaches 130 g/m3, while a high content of C19+ hydrocarbons is observed. The system formed by the method of flash-pyrolysis makes it possible to obtain mainly the gasoline (C5-C10) and diesel (C11-C18) hydrocarbon fractions. It should be noted that the products of the reaction have a high content of unsaturated hydrocarbons, which reaches 55%. Thus, the composition of the final products of FTS can be controlled by the choice of the catalytic suspension prepared method. \\nFor citation: \\nKulikova M.V., Dement’eva O.S., Chudakova M.V., Ivantsov M.I. Influence of preparing nanoscale suspensions method on its physico-chemical and catalytic properties under the conditions of Fischer-Tropsch synthesis. Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol. 2018. V. 61. N 9-10. P. 70-75 \\n \",\"PeriodicalId\":45993,\"journal\":{\"name\":\"Izvestiya Vysshikh Uchebnykh Zavedenii Khimiya i Khimicheskaya Tekhnologiya\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.6000,\"publicationDate\":\"2018-10-22\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Izvestiya Vysshikh Uchebnykh Zavedenii Khimiya i Khimicheskaya Tekhnologiya\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.6060/IVKKT20186109-10.5863A\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"CHEMISTRY, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Izvestiya Vysshikh Uchebnykh Zavedenii Khimiya i Khimicheskaya Tekhnologiya","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.6060/IVKKT20186109-10.5863A","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"CHEMISTRY, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 1

摘要

提出了通过费-托法形成在合成气转化为C5+烃中表现出活性的稳定含铁悬浮液的方法。通过XRD和DLS方法确定,具有50和295nm双峰粒度分布的Fe2O3相的形成导致通过液滴热解法形成悬浮液——活性金属前体溶液逐渐引入分散介质(碳氢化合物C19H40-C32H66的混合物)。将活性金属前体溶液脉冲引入反应器区(闪速热解)导致形成粒径为91和460nm的Fe3O4相。通过TEM和AFM方法确定,无论浆料形成方法如何,大的活性相颗粒都是平均尺寸为42nm的更细颗粒部分的团聚体。在浆料反应器条件下,所获得的悬浮液在费托合成中表现出高活性,然而,在通过滴热解法制备的催化悬浮液的情况下,CO转化率略高。结果表明,形成悬浮液的方法显著影响所得反应产物的组成分数。在通过液滴热解获得的悬浮液的存在下,液体烃的产率达到130g/m3,同时观察到高含量的C19+烃。通过闪蒸热解方法形成的体系使得主要获得汽油(C5-C10)和柴油(C11-C18)烃馏分成为可能。应该注意的是,反应产物具有高含量的不饱和烃,其达到55%。因此,FTS最终产物的组成可以通过选择催化悬浮液制备方法来控制。引用:Kulikova M.V.,Dement'eva O.S.,Chudakova M.V.Ivantsov M.I.在费托合成条件下制备纳米悬浮液方法对其物理化学和催化性能的影响。伊兹夫。维什。Uchebn。扎维德。Khim。Khim。Tekhnol。2018年第61条。N 9-10。第70-75页
本文章由计算机程序翻译,如有差异,请以英文原文为准。
INFLUENCE OF PREPARING NANOSCALE SUSPENSIONS METHOD ON ITS PHYSICO-CHEMICAL AND CATALYTIC PROPERTIES UNDER THE CONDITIONS OF FISCHER-TROPSCH SYNTHESIS
Methods for the formation of stable iron-containing suspensions that exhibit activity in the conversion of synthesis gas to C5+ hydrocarbons by the Fischer-Tropsch method are proposed. By XRD and DLS methods it was determined that the formation of the Fe2O3 phase with a bimodal particle size distribution of 50 and 295 nm results in the formation of a suspension by the drop thermolysis method − the gradual introduction of the active metal precursor solution into the dispersion medium (mixture of hydrocarbons C19H40-C32H66). Pulsed introduction of the active metal precursor solution (flash-pyrolysis) into the reactor zone leads to the formation of the Fe3O4 phase with a particle size of 91 and 460 nm. By TEM and AFM methods it was established that, regardless of the slurry forming method, large active phase particles are agglomerates of a finer fraction of particles with an average size of 42 nm. The obtained suspensions demonstrated high activity in the Fischer-Tropsch synthesis under the slurry-reactor conditions, however, the degree of CO conversion is slightly higher in the case of the catalytic suspension prepared by the drop thermolysis method. It is shown that the method of forming the suspension significantly affects the fractional composition of the resulting reaction products. In the presence of a suspension obtained by drop thermolysis, the yield of liquid hydrocarbons reaches 130 g/m3, while a high content of C19+ hydrocarbons is observed. The system formed by the method of flash-pyrolysis makes it possible to obtain mainly the gasoline (C5-C10) and diesel (C11-C18) hydrocarbon fractions. It should be noted that the products of the reaction have a high content of unsaturated hydrocarbons, which reaches 55%. Thus, the composition of the final products of FTS can be controlled by the choice of the catalytic suspension prepared method. For citation: Kulikova M.V., Dement’eva O.S., Chudakova M.V., Ivantsov M.I. Influence of preparing nanoscale suspensions method on its physico-chemical and catalytic properties under the conditions of Fischer-Tropsch synthesis. Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol. 2018. V. 61. N 9-10. P. 70-75  
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
CiteScore
1.40
自引率
44.40%
发文量
83
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信