偏瘫膝关节矫形器ANFIS动态滑模控制器建模与设计

IF 1.8 4区 计算机科学 Q3 ENGINEERING, BIOMEDICAL
Belay Eshetu, Dr. Solomon Seid Kebede
{"title":"偏瘫膝关节矫形器ANFIS动态滑模控制器建模与设计","authors":"Belay Eshetu, Dr. Solomon Seid Kebede","doi":"10.1155/2023/9953957","DOIUrl":null,"url":null,"abstract":"The use of assistive devices to control the loss of strength and range of motion of hemiplegic patients is becoming common. It is difficult to develop a precise control approach for a knee orthosis system because of the unpredictability of the dynamics and the unwanted subject’s spasm, jerk, and vibration during gait assistance. In this study, an adaptive neuro-fuzzy inference system (ANFIS) control system based on a nonlinear disturbance observer (NDO) and dynamic sliding mode controller (DSMC) is presented to restore the natural gait of hemiplegic patients experiencing mobility disorder and strength loss as well as monitor patient-induced disturbances and parameter variations during semiactive assistance of both the stance and swing phases. The knee orthosis system’s nonlinear dynamic relations are first developed using the Euler–Lagrange formation. Using MATLAB/Simulink, the dynamic model and controller design for the knee orthosis system was created. The Lyapunov theory is then used to ensure the knee orthosis system is asymptotically stable in view of the proposed controller once the proposed control scheme has been designed. The proposed control scheme’s (ANFIS–NDO–DSMC) gait tracking performances are shown and contrasted with the conventional sliding mode controller (SMC). Furthermore, a comparative performance analysis for parametric uncertainties and disturbances is presented to look at the robustness of the proposed controller (ANFIS–NDO–DSMC). The coefficient of determination (\n \n \n R\n \n 2\n \n \n \n ) and root mean square error (RMSE) between the reference knee angle and ANFIS–NDO–DSMC for stance phase are 1 and 0.000516 rad, respectively. For swing phase, \n \n \n R\n \n 2\n \n \n \n and RMSE are 0.9999 and 0.003202 rad, respectively. For SMC, RMSE is 0.000643 and 0.003252 rad for stance and swing phases, respectively. Stance and swing phase \n \n \n R\n \n 2\n \n \n \n is 0.9997 and 0.9994, respectively. As seen from simulation results, the proposed controller exhibited excellent gait tracking performance for the knee orthosis control with high robustness and very fast convergence to a steady state compared to SMC.","PeriodicalId":8029,"journal":{"name":"Applied Bionics and Biomechanics","volume":"1 1","pages":""},"PeriodicalIF":1.8000,"publicationDate":"2023-07-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Modeling and Design of ANFIS Dynamic Sliding Mode Controller for a Knee Orthosis of Hemiplegia\",\"authors\":\"Belay Eshetu, Dr. Solomon Seid Kebede\",\"doi\":\"10.1155/2023/9953957\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The use of assistive devices to control the loss of strength and range of motion of hemiplegic patients is becoming common. It is difficult to develop a precise control approach for a knee orthosis system because of the unpredictability of the dynamics and the unwanted subject’s spasm, jerk, and vibration during gait assistance. In this study, an adaptive neuro-fuzzy inference system (ANFIS) control system based on a nonlinear disturbance observer (NDO) and dynamic sliding mode controller (DSMC) is presented to restore the natural gait of hemiplegic patients experiencing mobility disorder and strength loss as well as monitor patient-induced disturbances and parameter variations during semiactive assistance of both the stance and swing phases. The knee orthosis system’s nonlinear dynamic relations are first developed using the Euler–Lagrange formation. Using MATLAB/Simulink, the dynamic model and controller design for the knee orthosis system was created. The Lyapunov theory is then used to ensure the knee orthosis system is asymptotically stable in view of the proposed controller once the proposed control scheme has been designed. The proposed control scheme’s (ANFIS–NDO–DSMC) gait tracking performances are shown and contrasted with the conventional sliding mode controller (SMC). Furthermore, a comparative performance analysis for parametric uncertainties and disturbances is presented to look at the robustness of the proposed controller (ANFIS–NDO–DSMC). The coefficient of determination (\\n \\n \\n R\\n \\n 2\\n \\n \\n \\n ) and root mean square error (RMSE) between the reference knee angle and ANFIS–NDO–DSMC for stance phase are 1 and 0.000516 rad, respectively. For swing phase, \\n \\n \\n R\\n \\n 2\\n \\n \\n \\n and RMSE are 0.9999 and 0.003202 rad, respectively. For SMC, RMSE is 0.000643 and 0.003252 rad for stance and swing phases, respectively. Stance and swing phase \\n \\n \\n R\\n \\n 2\\n \\n \\n \\n is 0.9997 and 0.9994, respectively. As seen from simulation results, the proposed controller exhibited excellent gait tracking performance for the knee orthosis control with high robustness and very fast convergence to a steady state compared to SMC.\",\"PeriodicalId\":8029,\"journal\":{\"name\":\"Applied Bionics and Biomechanics\",\"volume\":\"1 1\",\"pages\":\"\"},\"PeriodicalIF\":1.8000,\"publicationDate\":\"2023-07-14\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Applied Bionics and Biomechanics\",\"FirstCategoryId\":\"94\",\"ListUrlMain\":\"https://doi.org/10.1155/2023/9953957\",\"RegionNum\":4,\"RegionCategory\":\"计算机科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENGINEERING, BIOMEDICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Applied Bionics and Biomechanics","FirstCategoryId":"94","ListUrlMain":"https://doi.org/10.1155/2023/9953957","RegionNum":4,"RegionCategory":"计算机科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, BIOMEDICAL","Score":null,"Total":0}
引用次数: 0

摘要

使用辅助装置来控制偏瘫患者力量和活动范围的丧失正变得越来越普遍。由于动力学的不可预测性和不需要的受试者在步态辅助过程中的痉挛、抽搐和振动,很难为膝关节矫形器系统开发一种精确的控制方法。本研究提出了一种基于非线性干扰观测器(NDO)和动态滑模控制器(DSMC)的自适应神经模糊推理系统(ANFIS)控制系统,用于恢复具有行动障碍和力量丧失的偏瘫患者的自然步态,并监测患者在站立和摆动半主动辅助阶段引起的干扰和参数变化。首先利用欧拉-拉格朗日形式建立了膝关节矫形器系统的非线性动力学关系。利用MATLAB/Simulink建立了膝关节矫形器系统的动态模型和控制器设计。然后利用Lyapunov理论,一旦设计了所提出的控制方案,就可以确保膝关节矫形器系统在所提出的控制器下是渐近稳定的。给出了该控制方案(anfiss - ndo - dsmc)的步态跟踪性能,并与传统滑模控制器(SMC)进行了对比。此外,对参数不确定性和干扰进行了性能对比分析,以考察所提出的控制器(anfiss - ndo - dsmc)的鲁棒性。参考膝关节角度与姿态相位anfiss - ndo - dsmc的决定系数r2和均方根误差RMSE分别为1和0.000516 rad。对于摆动阶段,r2和RMSE分别为0.9999和0.003202 rad。对于SMC,姿态和摆动阶段的RMSE分别为0.000643和0.003252 rad。姿态和摆动相位r2分别为0.9997和0.9994。仿真结果表明,与SMC相比,该控制器具有较强的鲁棒性和较快的稳态收敛速度,具有良好的膝关节矫形器步态跟踪性能。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Modeling and Design of ANFIS Dynamic Sliding Mode Controller for a Knee Orthosis of Hemiplegia
The use of assistive devices to control the loss of strength and range of motion of hemiplegic patients is becoming common. It is difficult to develop a precise control approach for a knee orthosis system because of the unpredictability of the dynamics and the unwanted subject’s spasm, jerk, and vibration during gait assistance. In this study, an adaptive neuro-fuzzy inference system (ANFIS) control system based on a nonlinear disturbance observer (NDO) and dynamic sliding mode controller (DSMC) is presented to restore the natural gait of hemiplegic patients experiencing mobility disorder and strength loss as well as monitor patient-induced disturbances and parameter variations during semiactive assistance of both the stance and swing phases. The knee orthosis system’s nonlinear dynamic relations are first developed using the Euler–Lagrange formation. Using MATLAB/Simulink, the dynamic model and controller design for the knee orthosis system was created. The Lyapunov theory is then used to ensure the knee orthosis system is asymptotically stable in view of the proposed controller once the proposed control scheme has been designed. The proposed control scheme’s (ANFIS–NDO–DSMC) gait tracking performances are shown and contrasted with the conventional sliding mode controller (SMC). Furthermore, a comparative performance analysis for parametric uncertainties and disturbances is presented to look at the robustness of the proposed controller (ANFIS–NDO–DSMC). The coefficient of determination ( R 2 ) and root mean square error (RMSE) between the reference knee angle and ANFIS–NDO–DSMC for stance phase are 1 and 0.000516 rad, respectively. For swing phase, R 2 and RMSE are 0.9999 and 0.003202 rad, respectively. For SMC, RMSE is 0.000643 and 0.003252 rad for stance and swing phases, respectively. Stance and swing phase R 2 is 0.9997 and 0.9994, respectively. As seen from simulation results, the proposed controller exhibited excellent gait tracking performance for the knee orthosis control with high robustness and very fast convergence to a steady state compared to SMC.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Applied Bionics and Biomechanics
Applied Bionics and Biomechanics ENGINEERING, BIOMEDICAL-ROBOTICS
自引率
4.50%
发文量
338
审稿时长
>12 weeks
期刊介绍: Applied Bionics and Biomechanics publishes papers that seek to understand the mechanics of biological systems, or that use the functions of living organisms as inspiration for the design new devices. Such systems may be used as artificial replacements, or aids, for their original biological purpose, or be used in a different setting altogether.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信