铁在其熔点的辐射温度（653nm）。

Journal of Research of the National Bureau of Standards. Section A, Physics and Chemistry Pub Date : 1975-07-01 DOI:10.6028/jres.079A.015

A Cezairliyan, J L McClure

{"title":"铁在其熔点的辐射温度（653nm）。","authors":"A Cezairliyan, J L McClure","doi":"10.6028/jres.079A.015","DOIUrl":null,"url":null,"abstract":"Radiance temperature (at 653nm) of iron at its melting point was measured using a subsecond-duration pulse heating technique. Specimens in the form of strips with initially different surface roughnesses were used. The results do not indicate any dependence of radiance temperature (at the melting point) on initial surface or system operational conditions. The average radiance temperature (at 653 nm) at the melting point for 13 specimens is 1670 K on IPTS-68, with a standard deviation of 0.8 K and a maximum absolute deviation of 1.7 K. The total error in the radiance temperature is estimated to be not more than ±6 K.","PeriodicalId":17018,"journal":{"name":"Journal of Research of the National Bureau of Standards. Section A, Physics and Chemistry","volume":"79A 4","pages":"541-544"},"PeriodicalIF":0.0000,"publicationDate":"1975-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6565409/pdf/jres-79A-541.pdf","citationCount":"10","resultStr":"{\"title\":\"Radiance Temperature (at 653 nm) of Iron at Its Melting Point.\",\"authors\":\"A Cezairliyan, J L McClure\",\"doi\":\"10.6028/jres.079A.015\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Radiance temperature (at 653nm) of iron at its melting point was measured using a subsecond-duration pulse heating technique. Specimens in the form of strips with initially different surface roughnesses were used. The results do not indicate any dependence of radiance temperature (at the melting point) on initial surface or system operational conditions. The average radiance temperature (at 653 nm) at the melting point for 13 specimens is 1670 K on IPTS-68, with a standard deviation of 0.8 K and a maximum absolute deviation of 1.7 K. The total error in the radiance temperature is estimated to be not more than ±6 K.\",\"PeriodicalId\":17018,\"journal\":{\"name\":\"Journal of Research of the National Bureau of Standards. Section A, Physics and Chemistry\",\"volume\":\"79A 4\",\"pages\":\"541-544\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1975-07-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6565409/pdf/jres-79A-541.pdf\",\"citationCount\":\"10\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Research of the National Bureau of Standards. Section A, Physics and Chemistry\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.6028/jres.079A.015\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Research of the National Bureau of Standards. Section A, Physics and Chemistry","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.6028/jres.079A.015","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 10

摘要

使用亚秒持续时间脉冲加热技术测量了铁在其熔点处的辐射温度（653nm）。使用了最初具有不同表面粗糙度的条状试样。结果没有表明辐射温度（在熔点）对初始表面或系统操作条件的任何依赖性。在IPTS-68上，13个样品熔点处的平均辐射温度（653nm处）为1670K，标准偏差为0.8K，最大绝对偏差为1.7K。辐射温度的总误差估计不超过±6K。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Radiance Temperature (at 653 nm) of Iron at Its Melting Point.

Radiance temperature (at 653nm) of iron at its melting point was measured using a subsecond-duration pulse heating technique. Specimens in the form of strips with initially different surface roughnesses were used. The results do not indicate any dependence of radiance temperature (at the melting point) on initial surface or system operational conditions. The average radiance temperature (at 653 nm) at the melting point for 13 specimens is 1670 K on IPTS-68, with a standard deviation of 0.8 K and a maximum absolute deviation of 1.7 K. The total error in the radiance temperature is estimated to be not more than ±6 K.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Journal of Research of the National Bureau of Standards. Section A, Physics and Chemistry

自引率

0.00%

发文量