Electromagnetic shock wave lithotripsy of gallbladder stones in vitro: the role of different stone characteristics and treatment variables.

From 40 sets of five human gallstones obtained at cholecystectomy, four stones were subjected to either 125/250 (maximum generator output) or 250/500 (half maximum generator output) electromagnetic shock waves (treatments I/II and III/IV, respectively); the fifth stone was used for computed tomography (CT) and chemical analysis. Overall, 130 (81%) of 160 stones fragmented, including 72 (45%) adequately (fragments less than or equal to 5 mm). For the treatments I, II, III, and IV the overall fragmentation rates were 80%, 95%, 70%, and 80%, respectively. The corresponding percentages of adequate fragmentation ( less than or equal to 5 mm) were 38%, 70%, 30%, and 42%, respectively. The best results were thus obtained after application of 250 shock waves (maximum generator output; treatment II). Pure cholesterol stones (p less than 0.01), stones with a mean CT density less than or equal to 110 HU (p less than 0.001), and stones with a calcified rim (p < 0.05) fragmented significantly better, but adequate fragmentation ( less than or equal to 5 mm) was significantly determined by stone weight and diameter (p less than 0.001), bilirubin content (p less than 0.02), and calcium content (p less than 0.05). A weight greater than 500 mg and a diameter > 10 mm could be defined as stone characteristics with significant negative predictors of adequate fragmentation. However, because the experimental conditions in this in vitro study did not completely simulate clinical settings for various reasons, these observations must be interpreted accordingly.(ABSTRACT TRUNCATED AT 250 WORDS)