过冷奥氏体冷却速率对奥氏体贝氏体钢低循环疲劳性能的影响

IF 5.7 2区材料科学 Q1 ENGINEERING, MECHANICAL

International Journal of Fatigue Pub Date : 2025-01-04 DOI:10.1016/j.ijfatigue.2025.108809

Yingnan Li, Yu Zhang, Xiaoyan Long, Ranran Zhu, Wanshuai Wang, Yanguo Li, Zeliang Liu

{"title":"过冷奥氏体冷却速率对奥氏体贝氏体钢低循环疲劳性能的影响","authors":"Yingnan Li, Yu Zhang, Xiaoyan Long, Ranran Zhu, Wanshuai Wang, Yanguo Li, Zeliang Liu","doi":"10.1016/j.ijfatigue.2025.108809","DOIUrl":null,"url":null,"abstract":"Carbide-free bainitic microstructures with different morphologies were obtained by designing different cooling rates in medium-carbon bainitic steel, and the effect of undercooled austenite cooling rate on the low cycle fatigue (LCF) properties of austempering bainitic steels was systematically investigated. The results show that with the reduction of the cooling rate, the bainitic ferrite laths are coarsened, the content of retained austenite is reduced, and the proportion of filmy retained austenite is increased. The samples with a cooling rate of 30 °C/s at low strain amplitude possessed higher fatigue life, while the samples with a cooling rate of 0.3 °C/s at high strain amplitude exhibited higher fatigue life. This is because the phase transformation induced plasticity (TRIP) effect at low strain amplitude improves the samples’ plastic deformation resistance. In contrast, the brittle martensite produced by the TRIP effect at high strain amplitude is more likely to provide a crack propagation path.","PeriodicalId":14112,"journal":{"name":"International Journal of Fatigue","volume":"45 1","pages":""},"PeriodicalIF":5.7000,"publicationDate":"2025-01-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effect of undercooled austenite cooling rate on the low cycle fatigue properties of an austempering bainitic steel\",\"authors\":\"Yingnan Li, Yu Zhang, Xiaoyan Long, Ranran Zhu, Wanshuai Wang, Yanguo Li, Zeliang Liu\",\"doi\":\"10.1016/j.ijfatigue.2025.108809\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Carbide-free bainitic microstructures with different morphologies were obtained by designing different cooling rates in medium-carbon bainitic steel, and the effect of undercooled austenite cooling rate on the low cycle fatigue (LCF) properties of austempering bainitic steels was systematically investigated. The results show that with the reduction of the cooling rate, the bainitic ferrite laths are coarsened, the content of retained austenite is reduced, and the proportion of filmy retained austenite is increased. The samples with a cooling rate of 30 °C/s at low strain amplitude possessed higher fatigue life, while the samples with a cooling rate of 0.3 °C/s at high strain amplitude exhibited higher fatigue life. This is because the phase transformation induced plasticity (TRIP) effect at low strain amplitude improves the samples’ plastic deformation resistance. In contrast, the brittle martensite produced by the TRIP effect at high strain amplitude is more likely to provide a crack propagation path.\",\"PeriodicalId\":14112,\"journal\":{\"name\":\"International Journal of Fatigue\",\"volume\":\"45 1\",\"pages\":\"\"},\"PeriodicalIF\":5.7000,\"publicationDate\":\"2025-01-04\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Fatigue\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.1016/j.ijfatigue.2025.108809\",\"RegionNum\":2,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, MECHANICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Fatigue","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1016/j.ijfatigue.2025.108809","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}

引用次数: 0

摘要

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Effect of undercooled austenite cooling rate on the low cycle fatigue properties of an austempering bainitic steel

Carbide-free bainitic microstructures with different morphologies were obtained by designing different cooling rates in medium-carbon bainitic steel, and the effect of undercooled austenite cooling rate on the low cycle fatigue (LCF) properties of austempering bainitic steels was systematically investigated. The results show that with the reduction of the cooling rate, the bainitic ferrite laths are coarsened, the content of retained austenite is reduced, and the proportion of filmy retained austenite is increased. The samples with a cooling rate of 30 °C/s at low strain amplitude possessed higher fatigue life, while the samples with a cooling rate of 0.3 °C/s at high strain amplitude exhibited higher fatigue life. This is because the phase transformation induced plasticity (TRIP) effect at low strain amplitude improves the samples’ plastic deformation resistance. In contrast, the brittle martensite produced by the TRIP effect at high strain amplitude is more likely to provide a crack propagation path.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

International Journal of Fatigue 工程技术-材料科学：综合

CiteScore

10.70

自引率

21.70%

发文量

619

审稿时长

58 days

期刊介绍： Typical subjects discussed in International Journal of Fatigue address: Novel fatigue testing and characterization methods (new kinds of fatigue tests, critical evaluation of existing methods, in situ measurement of fatigue degradation, non-contact field measurements) Multiaxial fatigue and complex loading effects of materials and structures, exploring state-of-the-art concepts in degradation under cyclic loading Fatigue in the very high cycle regime, including failure mode transitions from surface to subsurface, effects of surface treatment, processing, and loading conditions Modeling (including degradation processes and related driving forces, multiscale/multi-resolution methods, computational hierarchical and concurrent methods for coupled component and material responses, novel methods for notch root analysis, fracture mechanics, damage mechanics, crack growth kinetics, life prediction and durability, and prediction of stochastic fatigue behavior reflecting microstructure and service conditions) Models for early stages of fatigue crack formation and growth that explicitly consider microstructure and relevant materials science aspects Understanding the influence or manufacturing and processing route on fatigue degradation, and embedding this understanding in more predictive schemes for mitigation and design against fatigue Prognosis and damage state awareness (including sensors, monitoring, methodology, interactive control, accelerated methods, data interpretation) Applications of technologies associated with fatigue and their implications for structural integrity and reliability. This includes issues related to design, operation and maintenance, i.e., life cycle engineering Smart materials and structures that can sense and mitigate fatigue degradation Fatigue of devices and structures at small scales, including effects of process route and surfaces/interfaces.