Carbon nanotube intermediate layer intercalation and its influence on surface charge of thin film composite membrane

The surface charge of a separation membrane is a critical factor affecting its performance in ion separation and fouling resistance. Thin-film composite (TFC) polyamide (PA) membrane, commonly used in water treatment, often suffer from excessive surface negative charges, which significantly limits their application and fouling resistance. To address this issue, this work introduces a carbon nanotubes (CNT) intermediate layer to adjust the surface charge of TFC PA membranes, aiming to achieve a PA layer with neutral properties. Novel grazing-incidence wide-angle x-ray scattering (GIWAXS) measurements were employed to elucidate the effect of CNT on the molecular chain stacking of PA. The CNT intermediate layer was found to influence the PA cross-linking, which is related to surface negative charge, by controlling the storage and release of the m-phenylenediamine monomer during interfacial polymerization. The neutral CNT-TFC membrane demonstrated improved NH₄⁺ retention and increased resistance to fouling by protein, surfactant, and E. coli. However, other surface properties, such as roughness and hydrophilicity, could counteract the antifouling benefits of a neutral surface. This work provides insights into additional advantages of CNT intermediate layer intercalation in TFC PA membranes, such as enhanced cross-linking and surface charge control.