超低分子量聚乙烯在多向运动中的磨损机理和磨损碎片表征

IF 2.9 3区 工程技术 Q2 ENGINEERING, CHEMICAL
Ruijuan Liu, Yali Zhang, Jian Pu, Maoyan Jie, Qin Xiong, Xiaogang Zhang, Xinle Li, Zhongmin Jin
{"title":"超低分子量聚乙烯在多向运动中的磨损机理和磨损碎片表征","authors":"Ruijuan Liu,&nbsp;Yali Zhang,&nbsp;Jian Pu,&nbsp;Maoyan Jie,&nbsp;Qin Xiong,&nbsp;Xiaogang Zhang,&nbsp;Xinle Li,&nbsp;Zhongmin Jin","doi":"10.1007/s11249-024-01928-3","DOIUrl":null,"url":null,"abstract":"<div><p>Ultralow-wear polyethylene (ULWPE) was proposed to replace conventional UHMWPE as an artificial joint material. Different molecular weights of ULWPE, ULWPE-200, ULWPE-300, and ULWPE-700 were examined against CrCoMo compared to conventional UHMWPE in multidirectional motion. The wear mechanism was elucidated from the perspective of macroscopic wear behavior and microscopic wear debris characterization. It was found that the morphologies of the ULWPE worn surface were similar to that of UHMWPE, with scratches, burnishing, and protuberances. ULWPE-700 possessed the lowest wear loss at all loading conditions, and the wear loss was 40.3% lower than that of UHMWPE at 3 MPa. Furthermore, wear debris was consistent in morphology and size range but showed differences in quantity, size distribution, and shape distribution. Combined with the wear surface morphology and wear debris analysis, it showed that plastic deformation was the main cause of wear debris formation and the wear mechanisms were adhesive wear and abrasive wear. Moreover, the FBA of ULWPE-700 was 64% lower than that of UHMWPE at 3 MPa, suggesting that ULWPE-700 wear debris had the lowest potential osteolysis. This study provides deeper insight into the bio-tribological behavior and the potential biological activity of ULWPE as an artificial joint material.</p><h3>Graphical Abstract</h3>\n<div><figure><div><div><picture><source><img></source></picture></div></div></figure></div></div>","PeriodicalId":806,"journal":{"name":"Tribology Letters","volume":null,"pages":null},"PeriodicalIF":2.9000,"publicationDate":"2024-11-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Wear Mechanism and Wear Debris Characterization of ULWPE in Multidirectional Motion\",\"authors\":\"Ruijuan Liu,&nbsp;Yali Zhang,&nbsp;Jian Pu,&nbsp;Maoyan Jie,&nbsp;Qin Xiong,&nbsp;Xiaogang Zhang,&nbsp;Xinle Li,&nbsp;Zhongmin Jin\",\"doi\":\"10.1007/s11249-024-01928-3\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>Ultralow-wear polyethylene (ULWPE) was proposed to replace conventional UHMWPE as an artificial joint material. Different molecular weights of ULWPE, ULWPE-200, ULWPE-300, and ULWPE-700 were examined against CrCoMo compared to conventional UHMWPE in multidirectional motion. The wear mechanism was elucidated from the perspective of macroscopic wear behavior and microscopic wear debris characterization. It was found that the morphologies of the ULWPE worn surface were similar to that of UHMWPE, with scratches, burnishing, and protuberances. ULWPE-700 possessed the lowest wear loss at all loading conditions, and the wear loss was 40.3% lower than that of UHMWPE at 3 MPa. Furthermore, wear debris was consistent in morphology and size range but showed differences in quantity, size distribution, and shape distribution. Combined with the wear surface morphology and wear debris analysis, it showed that plastic deformation was the main cause of wear debris formation and the wear mechanisms were adhesive wear and abrasive wear. Moreover, the FBA of ULWPE-700 was 64% lower than that of UHMWPE at 3 MPa, suggesting that ULWPE-700 wear debris had the lowest potential osteolysis. This study provides deeper insight into the bio-tribological behavior and the potential biological activity of ULWPE as an artificial joint material.</p><h3>Graphical Abstract</h3>\\n<div><figure><div><div><picture><source><img></source></picture></div></div></figure></div></div>\",\"PeriodicalId\":806,\"journal\":{\"name\":\"Tribology Letters\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":2.9000,\"publicationDate\":\"2024-11-04\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Tribology Letters\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://link.springer.com/article/10.1007/s11249-024-01928-3\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENGINEERING, CHEMICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Tribology Letters","FirstCategoryId":"5","ListUrlMain":"https://link.springer.com/article/10.1007/s11249-024-01928-3","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
引用次数: 0

摘要

有人提出用超低磨损聚乙烯(ULWPE)取代传统的超高分子量聚乙烯(UHMWPE)作为人工关节材料。与传统的超高分子量聚乙烯相比,在多向运动中对不同分子量的 ULWPE、ULWPE-200、ULWPE-300 和 ULWPE-700 与 CrCoMo 进行了测试。从宏观磨损行为和微观磨损碎片特征的角度阐明了磨损机理。研究发现,ULWPE 磨损表面的形态与超高分子量聚乙烯相似,都有划痕、烧伤和突起。在所有加载条件下,ULWPE-700 的磨损损耗最小,在 3 兆帕时,磨损损耗比超高分子量聚乙烯低 40.3%。此外,磨损碎屑的形态和尺寸范围一致,但在数量、尺寸分布和形状分布方面存在差异。结合磨损表面形态和磨损碎屑分析表明,塑性变形是磨损碎屑形成的主要原因,磨损机理为粘着磨损和磨料磨损。此外,在 3 兆帕时,ULWPE-700 的 FBA 比超高分子量聚乙烯低 64%,这表明 ULWPE-700 磨损碎片的潜在溶骨率最低。这项研究有助于深入了解 ULWPE 作为人工关节材料的生物组织行为和潜在生物活性。 图文摘要
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Wear Mechanism and Wear Debris Characterization of ULWPE in Multidirectional Motion

Ultralow-wear polyethylene (ULWPE) was proposed to replace conventional UHMWPE as an artificial joint material. Different molecular weights of ULWPE, ULWPE-200, ULWPE-300, and ULWPE-700 were examined against CrCoMo compared to conventional UHMWPE in multidirectional motion. The wear mechanism was elucidated from the perspective of macroscopic wear behavior and microscopic wear debris characterization. It was found that the morphologies of the ULWPE worn surface were similar to that of UHMWPE, with scratches, burnishing, and protuberances. ULWPE-700 possessed the lowest wear loss at all loading conditions, and the wear loss was 40.3% lower than that of UHMWPE at 3 MPa. Furthermore, wear debris was consistent in morphology and size range but showed differences in quantity, size distribution, and shape distribution. Combined with the wear surface morphology and wear debris analysis, it showed that plastic deformation was the main cause of wear debris formation and the wear mechanisms were adhesive wear and abrasive wear. Moreover, the FBA of ULWPE-700 was 64% lower than that of UHMWPE at 3 MPa, suggesting that ULWPE-700 wear debris had the lowest potential osteolysis. This study provides deeper insight into the bio-tribological behavior and the potential biological activity of ULWPE as an artificial joint material.

Graphical Abstract

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Tribology Letters
Tribology Letters 工程技术-工程:化工
CiteScore
5.30
自引率
9.40%
发文量
116
审稿时长
2.5 months
期刊介绍: Tribology Letters is devoted to the development of the science of tribology and its applications, particularly focusing on publishing high-quality papers at the forefront of tribological science and that address the fundamentals of friction, lubrication, wear, or adhesion. The journal facilitates communication and exchange of seminal ideas among thousands of practitioners who are engaged worldwide in the pursuit of tribology-based science and technology.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信