Impact of SiGe pocket on different shape TFET structures for gas sensing application

Gas sensing requires highly sensitive and selective sensor technologies for environmental monitoring, industrial safety, and public health objectives. Although conventional MOSFET-based gas sensors are widely utilized, their detection of low quantities of gases, such as ammonia, is hindered by a number of severe constraints. TFET is emerged as the better device than MOSFET, particularly for the sensing applications. In this work we discussed the source engineered and shape engineered techniques to improve the performance of TFETs, specifically for ammonia gas detection. Comprehensive simulations on SILVACO TCAD and compared the four TFET structures SiGe-pocket DGTFET, SiGe-pocket vertical TFET SiGe-pocket Z-shape TFET, and SiGe-pocket U-shape TFET structure on the basis of various electrical characterization parameters. Significant improvements in efficiency and sensitivity are obtained by adjusting the work function of the molybdenum (4.40–4.60 eV) catalytic gate metal to find the optimal values. The findings reveal that the SiGe-pocket U-shape TFET structure exhibits superior performance, demonstrating an I_ON of 8.01 × 10⁻⁴ A/μm, an I_ON/I_OFF ratio of 1.25×10¹³, and an OFF current sensitivity (S_OFF) of 1.262. These results highlight the enhanced sensitivity and efficacy of the proposed SiGe-pocket U-shape tunnel FET in ammonia gas sensing applications, making it a promising candidate for practical uses in environmental monitoring and industrial safety.