Removal of arsenic from aqueous solution using magnetic biochar derived from Spirulina platensis

Arsenic contamination in surface waters and groundwater affects millions of people on a daily basis. Oxidation of As(III) to less toxic As(V) is a widely used strategy to enhance the removal of As from solution. This study developed and evaluated a Fe-modified biochar (FeSP600). Spirulina platensis (SP) is one of the most promising microalgae because of its physicochemical properties and potential applications. The high N content of SP may affect the physicochemical properties of the biochar, which could be used as an inherent N source for N doping biochar by carbonization. After Fe modification, the formed Fe species and N-containing components of SP were used to introduce pyridinic N, which can be coordinated with Fe to form Fe-N. We demonstrated that the formed Fe species (Fe⁰, Fe²⁺ and Fe³⁺) and the defective structures in FeSP600 could act as active sites for surface catalytic reactions. FeSP600 not only had magnetic properties but also could effectively remove As from an aqueous solution. These properties were attributed to the release of Fe²⁺ and the reactive oxygen species (ROSs) generated by the γ-Fe₂O₃ particles on the crystalline defect structure. As(III) and As(V) removal were affected by the initial pH values. The removal efficiencies for As(III) increased from 57.2 % to 94.9 % as the pH increased from 3 to 9, whereas that for As(V) decreased from 80.1 % to 46.8 %. The presence of coexisting ions either completely ($P{O}_4^{3-}$) or partially ($C{l}^{-}$, $C{O}_3^{2-}$ and $S{O}_4^{2-}$) inhibited As removal. The removal of As(V) depended on electrostatic interactions, but As(III) removal was a complex process, including both oxidation and surface adsorption, as the ROSs were able to oxidize As(III) to As(V). Our study demonstrates that FeSP600 has properties that are beneficial for the removal of As(III) and As(V) from aqueous environments. The findings of this study have potential for real-world application in treating As-contaminated water sources, particularly in improving drinking water purification systems in developing countries. More importantly, an assessment of the impact of FeSP600 usage on aquatic ecosystems is required to ensure the safe application of this technology. Therefore, developing methods for mass production of FeSP600 is essential for the commercialization of this technology, necessitating process engineering studies in this area.