Bioderived carbon aerogels loaded with g-C3N4 and their high Efficacy removing volatile organic compounds (VOCs).

Indoor air pollution, predominantly caused by volatile organic compounds (VOCs), poses significant health hazards when concentrations surpass critical thresholds. Using waste corn straw as carbon source and urea as nitrogen source, straw derived carbon aerogel (CAGH) loaded with g-C₃N_{4H2O-N2-450-3 h} was successfully prepared by hydrothermal and water-assisted calcination. Following water-assisted regulation, g-C₃N_{4H2O-N2-450-3 h} on CAGH exhibited a mixed structure comprising honeycomb and two-dimensional filaments, while the growth of g-C₃N_{4H2O-N2-450-3 h} was uniformly distributed on carbon aerogel in a line-surface combination fashion. This innovative binding method not only enhanced the loading capacity of g-C₃N₄ and the mechanical elasticity of aerogel, but also exposed a large number of adsorption sites, resulting in a significant increase in its adsorption capacity for VOCs, exceeding that of commercial activated carbon (AC). In comparison to pure g-C₃N₄, CAGH exhibited an expanded photo-response range. Under the exposure of visible light, CAGH proved highly effective in eliminating 73.87 % of toluene. In addition, it has demonstrated efficient removal of formaldehyde and acetone VOCs with good cyclic stability. Therefore, this work aims to reduce the emission of pollutants at source and provide an effective and economical strategy for the preparation of clean building materials from renewable materials, with potential applications in the environmental field.