Robust Multi-Band DNG metamaterial absorber for GPS (L1), ISM, and 5G application with Enhanced polarization and angle stability

This research introduces a triple-band metamaterial absorber characterized by insensitivity to both polarization and incident angles. The structure includes square ring resonators on the upper side and a continuous metal ground on the lower side, separated by an FR4 substrate. At the lowest operating frequency, the unit cell’s thickness, and length measure 0.0128λ and 0.156λ, respectively. Under normal incidence, the proposed absorber demonstrates three clear absorption peaks at 1.56, 2.43, and 3.36 GHz, achieving absorption rates of 98 %, 99 %, and 97 %, respectively. The absorption response exhibits variation with incident angles up to 70° for both TM and TE polarizations due to its high-level symmetry. This configuration attains negative permittivity and permeability suitable for operational frequencies in the L-band and S-band. The study examines the electric field, impedance, and surface current to provide additional evidence for the absorption analysis. A validated RLC circuit equivalent to the proposed structure has been confirmed using Advanced Design System (ADS). The results indicate a slight deviation, especially at frequencies beyond the resonance frequencies. The structure underwent fabrication and testing in an anechoic chamber, revealing a strong correlation between the simulated and measured results. The suggested absorber holds promise for ISM applications, radar systems, sensing technologies, and energy harvesting systems.