Influence of surface curvature on the impact force of water droplet

Although the global market for wind energy is growing rapidly, leading-edge erosion is a critical issue hindering the development of wind power. The impact force of a droplet colliding with flat surfaces has been investigated in previous studies. However, the impact force exerted on curved surfaces, such as that experienced by eroded wind turbine blades, is not well understood. This study discusses the relationship between the impact force generated on a solid surface by a water droplet and the radius of curvature of the impacting surface. The impact force by a droplet was measured using a force sensor mounted on semi-cylindrical caps with different radii of curvature. The measurement results showed that the impact force decreased as the radius of curvature decreased. A computational fluid dynamics model solving incompressible flows showed that, unlike the case of a curved surface, the initial momentum of the droplet was mostly transferred to the flat surface. This resulted in a high impulse for an impact with a flat surface. The falling droplet was blocked by the surface, and the lateral jet was accelerated sideward. This acceleration was moderate for curved surfaces. When colliding with a flat surface, a higher impact force was generated owing to the wider area of the excited surface pressure compared with that of the curved surface. Finally, the relationship between the peak of the impact force and the surface curvature was derived, suggesting that the force peak is inversely proportional to the curvature.