Statistical analysis of parameters affecting Legionella and total cell growth in premise plumbing systems within buildings: A field study based on an empirical data set

During the storage and distribution of water in buildings, the excessive growth of pathogens can deteriorate the quality of drinking water. This study aims to investigate the factors influencing this growth and propose technical measures for prevention. The analysis is based on an empirical data set comprising 1361 samples from 204 domestic premise plumbing systems. In 14 systems, ultrafiltration plants were installed as microbiological barriers. Legionella cultivation and flow cytometry were used to determine microbiological properties. The study identified elevated total cell counts in tapping valves and pipe end lines in numerous premise plumbing systems, indicating prolonged water stagnation prior to sampling, which facilitates microbiological growth. Higher contamination rates were observed in these systems, with peripheral taps often being contaminated in lieu of the entire system. These systems were classified as microbiologically unstable due to the relevantly higher total cell numbers at hot water taps compared to the hot water tank (>25%). Furthermore, these systems exhibited a Legionella contamination rate that was 22.3% higher than in microbiologically stable systems. In some cases, peripheral contaminations may not accurately represent the entire premise plumbing system. Increasing the discard volume during sampling from 1 L to 3–5 L could provide more precise results during standard testing. Legionella species were primarily detected in the first 1 L of water after tap activation. Additionally, statistically significant relationships were observed between direct temperature and total cell number, as well as between the presence of ultrafiltration and total cell numbers at cold water taps.