Ultra‐thin benzalkonium chloride‐doped poly(lactic acid) electrospun mat

In this study, poly(lactic acid), poly(ethylene glycol), and benzalkonium chloride with different concentrations (3, 5, 7, and 9%wt.) (PLA/PEG/BCL) composite electrospun mats were produced. PLA is a non‐toxic polymer with high biocompatibility and biodegradability. However, it may be fragile due to its structure. Therefore, in this study, PEG was used as a plasticizer to improve the structural properties of PLA and it was aimed at providing antibacterial properties by adding BCL salt. Its use as an antibacterial composite nanomaterial effective against Gram‐positive Staphylococcus aureus (S. aureus) and Gram‐negative Escherichia coli (E. coli) bacterial cultures and as a dermal wound dressing material has been examined in two different areas. The addition of BCL salt reduced the bead formation in PLA/PEG nanofibers and increased the homogeneity of fiber dispersion. 9% BCL‐doped composite nanofiber was obtained as the smoothest and most homogeneous surface. This mat was reported to have the highest ductility. The low Tm of pure BCL salt enabled the Tg temperature of PLA/PEG/BCL composite nanofibers to be observed. It was observed that as the BCL salt ratio increased, the T5 and T10 temperatures of the nanofibers decreased and then increased. BCL‐doped mats exhibited liquid absorption behavior in the range of 497%–708%. PLA/PEG/BCL composite nanofibers showed high toxicity to the L929 fibroblast cell line. So, it has been reported that it cannot be used as a dermal wound dressing. PLA/PEG/BCL composite nanomaterials were reported to have 99.99% antibacterial activity against E. coli and S. aureus. It was suggested that it could be used in antibacterial coating applications by taking into account modern nanocoating technology.Highlights Poly(lactic acid), poly(ethylene glycol), and benzalkonium chloride (PLA/PEG/BCL) composite electrospun mats were produced. The addition of BCL salt reduced the bead formation in PLA/PEG nanofibers and increased the homogeneity of fiber dispersion. 9% BCL‐doped composite nanofiber was obtained as the smoothest and most homogeneous surface. PLA/PEG/BCL composite nanofibers showed high toxicity to the L929 fibroblast cell line. PLA/PEG/BCL composite nanomaterials were reported to have 99.99% antibacterial activity against E. coli and S. aureus.