David Appelhaus, Fabian Claus, Sabine Knoblauch, Katharina Jasch, Stephan Scholl
{"title":"283.15 至 403.15 K 作为蒸发实验参考系的 3-氧杂-1,5-戊二醇与 2-丙醇、1,2,3-丙三醇和 1-癸醇二元混合物的密度、粘度、折射率和表面张力","authors":"David Appelhaus, Fabian Claus, Sabine Knoblauch, Katharina Jasch, Stephan Scholl","doi":"10.1021/acs.jced.4c00152","DOIUrl":null,"url":null,"abstract":"Thermophysical properties of potential reference systems for the characterization of evaporators, especially wiped film evaporators, are presented. Therefore, the binary mixtures of diethylene glycol (IUPAC: 3-oxa-1,5-pentanediol) with decan-1-ol, glycerol (IUPAC: 1,2,3-propanetriol) and isopropyl alcohol (IUPAC: 2-propanol) were considered. The refractive index at 293.15 K (589 nm) was measured using a refractrometer. The density was measured in a temperature range from 283.15 to 403.15 K depending on the boiling temperature of the fluids using an oscillating U-tube. The dynamic viscosity was determined in a temperature range from 283.15 to 403.15 K depending on the boiling temperature of the fluids using a kinematic viscometer based on a modified Couette measuring principle (Stabinger viscometer). The surface tension was measured in a temperature range from 293.15 to 363.15 K using the pendant drop method. The temperature dependence of the density, viscosity and surface tension of the pure components was described using standard literature models. The excess properties excess refractive index, excess molar volume, Δln(η/mPa·s)<sup><i>E</i></sup> and excess parachor were modeled using a temperature dependent Redlich–Kister approach.","PeriodicalId":42,"journal":{"name":"Journal of Chemical & Engineering Data","volume":"44 1","pages":""},"PeriodicalIF":2.0000,"publicationDate":"2024-08-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Density, Viscosity, Refractive Index, and Surface Tension of Binary Mixtures of 3-oxa-1,5-Pentanediol with 2-Propanol, 1,2,3-Propanetriol, and 1-Decanol from 283.15 to 403.15 K as Reference Systems for Evaporation Experiments\",\"authors\":\"David Appelhaus, Fabian Claus, Sabine Knoblauch, Katharina Jasch, Stephan Scholl\",\"doi\":\"10.1021/acs.jced.4c00152\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Thermophysical properties of potential reference systems for the characterization of evaporators, especially wiped film evaporators, are presented. Therefore, the binary mixtures of diethylene glycol (IUPAC: 3-oxa-1,5-pentanediol) with decan-1-ol, glycerol (IUPAC: 1,2,3-propanetriol) and isopropyl alcohol (IUPAC: 2-propanol) were considered. The refractive index at 293.15 K (589 nm) was measured using a refractrometer. The density was measured in a temperature range from 283.15 to 403.15 K depending on the boiling temperature of the fluids using an oscillating U-tube. The dynamic viscosity was determined in a temperature range from 283.15 to 403.15 K depending on the boiling temperature of the fluids using a kinematic viscometer based on a modified Couette measuring principle (Stabinger viscometer). The surface tension was measured in a temperature range from 293.15 to 363.15 K using the pendant drop method. The temperature dependence of the density, viscosity and surface tension of the pure components was described using standard literature models. The excess properties excess refractive index, excess molar volume, Δln(η/mPa·s)<sup><i>E</i></sup> and excess parachor were modeled using a temperature dependent Redlich–Kister approach.\",\"PeriodicalId\":42,\"journal\":{\"name\":\"Journal of Chemical & Engineering Data\",\"volume\":\"44 1\",\"pages\":\"\"},\"PeriodicalIF\":2.0000,\"publicationDate\":\"2024-08-29\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Chemical & Engineering Data\",\"FirstCategoryId\":\"1\",\"ListUrlMain\":\"https://doi.org/10.1021/acs.jced.4c00152\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"CHEMISTRY, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Chemical & Engineering Data","FirstCategoryId":"1","ListUrlMain":"https://doi.org/10.1021/acs.jced.4c00152","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"CHEMISTRY, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0
摘要
介绍了用于鉴定蒸发器,特别是抹膜蒸发器的潜在参考系统的热物理性质。因此,考虑了二甘醇(IUPAC:3-oxa-1,5-戊二醇)与癸-1-醇、甘油(IUPAC:1,2,3-丙三醇)和异丙醇(IUPAC:2-丙醇)的二元混合物。使用折射仪测量了 293.15 K (589 nm) 时的折射率。密度是在 283.15 至 403.15 K 的温度范围内根据液体的沸腾温度使用振荡 U 型管测量的。根据流体的沸腾温度,在 283.15 至 403.15 K 的温度范围内使用基于改良库埃特测量原理的运动粘度计(斯塔宾格粘度计)测定动态粘度。使用垂滴法测量了 293.15 至 363.15 K 温度范围内的表面张力。纯成分的密度、粘度和表面张力的温度依赖性是用标准文献模型描述的。过量特性过量折射率、过量摩尔体积、Δln(η/mPa-s)E 和过量降落伞则采用与温度相关的 Redlich-Kister 方法进行建模。
Density, Viscosity, Refractive Index, and Surface Tension of Binary Mixtures of 3-oxa-1,5-Pentanediol with 2-Propanol, 1,2,3-Propanetriol, and 1-Decanol from 283.15 to 403.15 K as Reference Systems for Evaporation Experiments
Thermophysical properties of potential reference systems for the characterization of evaporators, especially wiped film evaporators, are presented. Therefore, the binary mixtures of diethylene glycol (IUPAC: 3-oxa-1,5-pentanediol) with decan-1-ol, glycerol (IUPAC: 1,2,3-propanetriol) and isopropyl alcohol (IUPAC: 2-propanol) were considered. The refractive index at 293.15 K (589 nm) was measured using a refractrometer. The density was measured in a temperature range from 283.15 to 403.15 K depending on the boiling temperature of the fluids using an oscillating U-tube. The dynamic viscosity was determined in a temperature range from 283.15 to 403.15 K depending on the boiling temperature of the fluids using a kinematic viscometer based on a modified Couette measuring principle (Stabinger viscometer). The surface tension was measured in a temperature range from 293.15 to 363.15 K using the pendant drop method. The temperature dependence of the density, viscosity and surface tension of the pure components was described using standard literature models. The excess properties excess refractive index, excess molar volume, Δln(η/mPa·s)E and excess parachor were modeled using a temperature dependent Redlich–Kister approach.
期刊介绍:
The Journal of Chemical & Engineering Data is a monthly journal devoted to the publication of data obtained from both experiment and computation, which are viewed as complementary. It is the only American Chemical Society journal primarily concerned with articles containing data on the phase behavior and the physical, thermodynamic, and transport properties of well-defined materials, including complex mixtures of known compositions. While environmental and biological samples are of interest, their compositions must be known and reproducible. As a result, adsorption on natural product materials does not generally fit within the scope of Journal of Chemical & Engineering Data.