利用扫描激光源技术检测板状结构背面附着的沉积物

IF 3 2区工程技术 Q2 ENGINEERING, MECHANICAL

International Journal of Pressure Vessels and Piping Pub Date : 2024-09-03 DOI:10.1016/j.ijpvp.2024.105303

Shoma Tanaka, Takahiro Hayashi, Naoki Mori

{"title":"利用扫描激光源技术检测板状结构背面附着的沉积物","authors":"Shoma Tanaka, Takahiro Hayashi, Naoki Mori","doi":"10.1016/j.ijpvp.2024.105303","DOIUrl":null,"url":null,"abstract":"<div><p>An imaging technique using a scanning laser source (SLS) was applied to detect deposits inside pipes, which are necessary for the safe decommissioning of the Fukushima Nuclear Power Plant. Experimental results showed that the more firmly adhered the deposit on the back surface of a flat plate, the clearer it is to obtain an image of the deposit. This result is as expected because the imaging by an SLS technique is dependent on the bending stiffness of the thin plate structure. Furthermore, even epoxy putty as large as 50 mm in diameter adhered to the inner surface of the pipe could be imaged, and even when the receiver device was changed from a piezoelectric device to a non-contact laser doppler vibrometer, the image of the deposit could be obtained properly with some degradation of the image due to the effect of a lower signal-to-noise ratio.</p></div>","PeriodicalId":54946,"journal":{"name":"International Journal of Pressure Vessels and Piping","volume":"212 ","pages":"Article 105303"},"PeriodicalIF":3.0000,"publicationDate":"2024-09-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.sciencedirect.com/science/article/pii/S0308016124001807/pdfft?md5=ccc6da599c46b6b7db97b197dee36582&pid=1-s2.0-S0308016124001807-main.pdf","citationCount":"0","resultStr":"{\"title\":\"Detection of deposits adhered on the back surface of plate-like structures using a scanning laser source technique\",\"authors\":\"Shoma Tanaka, Takahiro Hayashi, Naoki Mori\",\"doi\":\"10.1016/j.ijpvp.2024.105303\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>An imaging technique using a scanning laser source (SLS) was applied to detect deposits inside pipes, which are necessary for the safe decommissioning of the Fukushima Nuclear Power Plant. Experimental results showed that the more firmly adhered the deposit on the back surface of a flat plate, the clearer it is to obtain an image of the deposit. This result is as expected because the imaging by an SLS technique is dependent on the bending stiffness of the thin plate structure. Furthermore, even epoxy putty as large as 50 mm in diameter adhered to the inner surface of the pipe could be imaged, and even when the receiver device was changed from a piezoelectric device to a non-contact laser doppler vibrometer, the image of the deposit could be obtained properly with some degradation of the image due to the effect of a lower signal-to-noise ratio.</p></div>\",\"PeriodicalId\":54946,\"journal\":{\"name\":\"International Journal of Pressure Vessels and Piping\",\"volume\":\"212 \",\"pages\":\"Article 105303\"},\"PeriodicalIF\":3.0000,\"publicationDate\":\"2024-09-03\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://www.sciencedirect.com/science/article/pii/S0308016124001807/pdfft?md5=ccc6da599c46b6b7db97b197dee36582&pid=1-s2.0-S0308016124001807-main.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Pressure Vessels and Piping\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0308016124001807\",\"RegionNum\":2,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENGINEERING, MECHANICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Pressure Vessels and Piping","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0308016124001807","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}

引用次数: 0

摘要

使用扫描激光源 (SLS) 的成像技术检测了管道内的沉积物，这对福岛核电站的安全退役非常必要。实验结果表明，沉积物在平板背面附着得越牢固，沉积物的图像就越清晰。这一结果在意料之中，因为 SLS 技术的成像取决于薄板结构的弯曲刚度。此外，即使是粘附在管道内表面的直径达 50 毫米的环氧腻子也能成像，甚至当接收装置从压电装置改为非接触式激光多普勒测振仪时，也能正确获得沉积物的图像，只是由于信噪比较低的影响，图像会有一些衰减。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Detection of deposits adhered on the back surface of plate-like structures using a scanning laser source technique

An imaging technique using a scanning laser source (SLS) was applied to detect deposits inside pipes, which are necessary for the safe decommissioning of the Fukushima Nuclear Power Plant. Experimental results showed that the more firmly adhered the deposit on the back surface of a flat plate, the clearer it is to obtain an image of the deposit. This result is as expected because the imaging by an SLS technique is dependent on the bending stiffness of the thin plate structure. Furthermore, even epoxy putty as large as 50 mm in diameter adhered to the inner surface of the pipe could be imaged, and even when the receiver device was changed from a piezoelectric device to a non-contact laser doppler vibrometer, the image of the deposit could be obtained properly with some degradation of the image due to the effect of a lower signal-to-noise ratio.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

International Journal of Pressure Vessels and Piping 工程技术-工程：机械

CiteScore

5.30

自引率

13.30%

发文量

208

审稿时长

17 months

期刊介绍： Pressure vessel engineering technology is of importance in many branches of industry. This journal publishes the latest research results and related information on all its associated aspects, with particular emphasis on the structural integrity assessment, maintenance and life extension of pressurised process engineering plants. The anticipated coverage of the International Journal of Pressure Vessels and Piping ranges from simple mass-produced pressure vessels to large custom-built vessels and tanks. Pressure vessels technology is a developing field, and contributions on the following topics will therefore be welcome: • Pressure vessel engineering • Structural integrity assessment • Design methods • Codes and standards • Fabrication and welding • Materials properties requirements • Inspection and quality management • Maintenance and life extension • Ageing and environmental effects • Life management Of particular importance are papers covering aspects of significant practical application which could lead to major improvements in economy, reliability and useful life. While most accepted papers represent the results of original applied research, critical reviews of topical interest by world-leading experts will also appear from time to time. International Journal of Pressure Vessels and Piping is indispensable reading for engineering professionals involved in the energy, petrochemicals, process plant, transport, aerospace and related industries; for manufacturers of pressure vessels and ancillary equipment; and for academics pursuing research in these areas.