Accuracy analysis and improvement methods for revolving parts in counter-rotating electrochemical machining with continuous radial feeding

Counter-rotating electrochemical machining (CRECM) stands out as an efficient and cost-effective method for machining aero-engine casings. To maintain stability in the CRECM process equilibrium state, continuous feeding of the cathode tool is essential. However, this continuous feeding approach with single direction of rotation may result in poor roundness and reduced machining accuracy. This paper aims to analyze the sources and rules of roundness error and asymmetry in CRECM. Based on simulation results, a method involving periodic reverse rotation of electrodes with continuous feeding is proposed for CRECM. This approach aims to mitigate the cumulative machining error, thereby significantly improving machining accuracy. Experimental results validate the efficacy of the proposed method at a rotation speed of 0.2 rpm. The roundness error is markedly reduced from 0.19 mm to 0.04 mm, resulting in a more symmetric convex structure. Additionally, the sidewall taper angle is reduced from 14.5 degrees to 6.4 degrees. This underscores the effectiveness of the proposed method in enhancing machining accuracy.