Analysis of Tall Building by using Different Dimensions Under Wind Load Effects

Abstract: The expense of land is increasing day by day because of rapid increase in the population whereas vegetation is diminishing, due to diminished vegetation contamination is expanded. In this Research paper, we analyze the various types of the dimensions of the building considering them side ratios too and the effect of windward forces on the building in mainly X and Z direction. This paper is about the study of four-building models as Dimensions (30m*30m), (40m*25m), (55m*20m), (80m*15m) having their horizontal Aspect ratios viz. 1, 1.6, 2.75 & 5.33 at an angle of 0 degrees. The height of the building is 90m. Therefore, the research is proceeding to balance out the structure from an increasingly affordable perspective. To find out the best performance and economical for the lateral wind-force resisting system of different models of 25 storey buildings are modelled in STAAD-PRO, assuming the site location as AGRA (Uttar Pradesh), India. For the different structural systems that are compared for minimum and maximum storey displacement, storey drift. The structural system used is prototype. The axial force, shear force, moment, and reactions at various windward sides are used to compare the best performance of the structure. Above all, wind forces in x- direction shows the adequate displacement and drift values when compared to z- direction but from the economic point of view Model-2 gives the satisfactory result from all the above.